Suggested Hydraulic Thumb Size and Specs for your Terex TC29 Mini Excavator. November 18 2014, 0 Comments


This compact crawler excavator is great for ground leveling and backfilling. It offers an offset boom with built in swing that provides awesome visibility but also multi- width excavation and parallel to wall operation. If your looking to add some extra value to your TC29 we suggest you add a fully hydraulic thumb attachment.

 

In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
 
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine. 
Recommended: Size based on operating weight
We suggest a 
24" Basic Hydraulic 
24" Fully Hydraulic 
If you measure your machine and need something larger please email us with the length for a quote. 

 

 

 

 

Selected Dimensions

Boom/Stick Option
I. MAX CUTTING HEIGHT 13.4 ft in 4070 mm
J. MAX LOADING HEIGHT 9.3 ft in 2840 mm
L. MAX VERTICAL WALL DIGGING DEPTH 4.9 ft in 1500 mm
M. MAX DIGGING DEPTH 9.1 ft in 2760 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS 4.6 ft in 1400 mm
E. GROUND CLEARANCE 0.89 ft in 270 mm
G. HEIGHT TO TOP OF CAB 8.2 ft in 2500 mm
H. TAIL SWING RADIUS 4.3 ft in 1300 mm
Undercarriage
F. TRACK GAUGE 3.6 ft in 1100 mm
N. SHOE SIZE 11.8 in 300 mm

Specification

Engine
MAKE Mitsubishi
MODEL S 4L
NET POWER 28 hp 20.9 kw
POWER MEASURED @ 2200 rpm
DISPLACEMENT 91 cu in 1.5 L
NUMBER OF CYLINDERS 4
Operational
OPERATING WEIGHT 6480 lb 2939.3 kg
FUEL CAPACITY 13.7 gal 52 L
HYDRAUILC SYSTEM FLUID CAPACITY 22.5 gal 85 L
OPERATING VOLTAGE 12 V
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 3050 psi 21029 kPa
HYDRAULIC PUMP FLOW CAPACITY 26.2 gal/min 99 L/min
Swing Mechanism
SWING SPEED 10 rpm
Undercarriage
SHOE SIZE 11.8 in 300 mm
GROUND PRESSURE 3.9 psi 26.9 kPa
MAX TRAVEL SPEED 2.9 mph 4.6 km/h
DRAWBAR PULL 6300 lb 28 kN
TRACK GAUGE 3.6 ft in 1100 mm
Buckets
REFERENCE BUCKET CAPACITY 0.09 yd3 0.07 m3
MINIMUM BUCKET CAPACITY 0.05 yd3 0.04 m3
MAXIMUM BUCKET CAPACITY 0.14 yd3 0.11 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1 boom w/ dipperstick 53'' (1350mm)
MAX DIGGING DEPTH 9.1 ft in 2760 mm
MAX CUTTING HEIGHT 13.4 ft in 4070 mm
MAX LOADING HEIGHT 9.3 ft in 2840 mm
MAX VERTICAL WALL DIGGING DEPTH 4.9 ft in 1500 mm
Boom/Stick Option (HEX) 2
BOOM/STICK OPTION (HEX) 2 boom w/ dipperstick 61'' (1550mm)
MAX DIGGING DEPTH 9.7 ft in 2960 mm
MAX CUTTING HEIGHT 13.7 ft in 4190 mm
MAX LOADING HEIGHT 9.7 ft in 2960 mm
MAX VERTICAL WALL DIGGING DEPTH 5.1 ft in 1550 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS 4.6 ft in 1400 mm
HEIGHT TO TOP OF CAB 8.2 ft in 2500 mm
GROUND CLEARANCE 0.89 ft in 270 mm
TAIL SWING RADIUS 4.3 ft in 1300 mm



New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Mini+Excavator&make=Terex&model=TC29&modelid=92651#ixzz3JR1tDrtT