Looking for a Thumb Attachment for your John Deere 410B Loader Backhoe? October 09 2014, 0 Comments

Recommended Backhoe Thumb Sizes are based on operating weight for a  John Deere 410B Loader Backhoe.

John Deere 410B Loader Backhoe

We suggest a 
36" Mechanical Thumb Attachment- $645. - $25 Discount = $620 + FREE Shipping 
36" Fully Hydraulic Thumb Attachment - $785 - $25 Discount = $760 + FREE Shipping 

 

I n order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions 
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine. For a digram follow this link to our site. > Measuring Instructions
 Follow this link for specs pictures and descriptions. Click here -->  Pictures of Thumbs 
If you measure your machine and need something larger please email us with the length for a quote. 

 

 

Check out the pecs and dimensions of your

John Deere 410B Loader Backhoe

 

Selected Dimensions

Backhoe
J. LOAD HEIGHT - STD 11.8 ft in 3590 mm
K. REACH FROM SWIVEL - STD 17.6 ft in 5360 mm
L. DIG DEPTH - STD 14.5 ft in 4420 mm
M. REACH AT LOAD HEIGHT - STD 21.4 ft in 6530 mm
Dimensions
A. TRANSPORT LENGTH 23 ft in 7010 mm
B. TRANSPORT WIDTH 7.7 ft in 2340 mm
C. TRANSPORT HEIGHT 11.4 ft in 3480 mm
D. WHEELBASE 6.9 ft in 2100 mm
E. GROUND CLEARANCE 1 ft in 305 mm
Loader
G. CLEARANCE AT MAX DUMP HEIGHT 9 ft in 2740 mm
H. REACH AT MAX DUMP HEIGHT 2.3 ft in 710 mm
I. DIG DEPTH 4 in 100 mm

Specification

Engine
MAKE John Deere
MODEL 4-219D
GROSS POWER 66 hp 49.2 kw
NET POWER 62 hp 46.2 kw
DISPLACEMENT 219 cu in 3.6 L
POWER MEASURED @ 2500 rpm
TORQUE MEASURED @ 1300 rpm
NUMBER OF CYLINDERS 4
NET TORQUE RISE 20 %
NET MAX TORQUE 156 lb ft 211.5 Nm
ASPIRATION Naturally aspirated
Operational
MAX WEIGHT 14400 lb 6545 kg
FUEL CAPACITY 23 gal 87 L
HYDRAULIC SYSTEM FLUID CAPACITY 19 gal 72 L
OIL SYSTEM FLUID CAPACITY 2.3 gal 8.5 L
COOLING SYSTEM FLUID CAPACITY 4.2 gal 16 L
TRANSMISSION FLUID CAPACITY 3.4 gal 13 L
TURNING RADIUS 10.3 ft in 3120 mm
TIRE SIZE FRONT - 2WD / 4WD 11L-15,10PR,F3;12.00-16.5,8PR,R4
REAR TIRES SIZE 2WD/4WD 19.5L-24,10PR,R4
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 35 amps
Transmission
TYPE Manual shift with first and second speeds having sliding collar engagement and third and fourth speeds engaged in cone-type synchronizers.
NUMBER OF FORWARD GEARS 4
NUMBER OF REVERSE GEARS 4
MAX SPEED - FORWARD 22.3 mph 35.9 km/h
MAX SPEED REVERSE 25.9 mph 41.7 km/h
Backhoe
DIG DEPTH - STD 14.5 ft in 4420 mm
DIG DEPTH - EXT 18.5 ft in 5640 mm
REACH FROM SWIVEL - STD 17.6 ft in 5360 mm
REACH FROM SWIVEL - EXT 21.6 ft in 6580 mm
BUCKET DIG FORCE - STD 10200 lb 4625 kg
BUCKET DIG FORCE - EXT 10200 lb 4625 kg
LOAD AT MAX LIFT - STD 4200 lb 1920 kg
LOAD AT MAX LIFT - EXT 2440 lb 1110 kg
LOAD HEIGHT - STD 11.8 ft in 3590 mm
LOAD HEIGHT - EXT 12.8 ft in 3910 mm
REACH AT LOAD HEIGHT - STD 21.4 ft in 6530 mm
REACH AT LOAD HEIGHT - EXT 25.4 ft in 7750 mm
Loader
BUCKET CAPACITY 1.3 yd3 1 m3
BUCKET WIDTH 92 in 2340 mm
BUCKET BREAKOUT FORCE 7800 lb 3540 kN
LIFT CAPACITY AT FULL HEIGHT 5300 lb 2400 kg
CLEARANCE AT MAX DUMP HEIGHT 9 ft in 2740 mm
REACH AT MAX DUMP HEIGHT 2.3 ft in 710 mm
DIG DEPTH 4 in 100 mm
Hydraulic
PUMP TYPE 8 radial piston, closed-center, variable flow, constant pressure
PUMP FLOW CAPACITY 30 gal/min 1.9 L/min
RELIEF VALVE PRESSURE 2500 psi 17238 kPa
Dimensions
TRANSPORT LENGTH 23 ft in 7010 mm
TRANSPORT WIDTH 7.7 ft in 2340 mm
TRANSPORT HEIGHT 11.4 ft in 3480 mm
WHEELBASE 6.9 ft in 2100 mm
GROUND CLEARANCE 1 ft in 305 mm


New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Loader+Backhoe&make=John+Deere&model=410B&modelid=91966#ixzz3Ff9YEzLo