Case CX27B Excavator Specs July 01 2017, 0 Comments
Case CX27B Mini Excavator
Space is often tight on Job-sites limiting your ability to move and making it difficult to get things done. CASE Equipment has the the thing for that situation with the CX27B Mini Excavator. This machine features a short turning radius, that can turn 360° without any part of the tail hanging over the tracks.
If your looking to increase the productivity of your excavator adding a Thumb Attachment to your Case CX27B is just what you need. Take a look at the factory direct prices on Excavator Thumb Attachments offered by www.MiniExcavatorThumbs.com
Case CX27B Dimensions
Boom/Stick Option (HEX) 1
|
||
A. SHIPPING LENGTH OF UNIT | 13.9 ft in | 4130 mm |
C. SHIPPING HEIGHT OF UNIT | 8.2 ft in | 2500 mm |
I. MAX CUTTING HEIGHT | 14.7 ft in | 4470 mm |
J. MAX LOADING HEIGHT | 10.4 ft in | 3170 mm |
K. MAX REACH ALONG GROUND | 14.8 ft in | 4510 mm |
L. MAX VERTICAL WALL DIGGING DEPTH | 7.6 ft in | 2320 mm |
M. MAX DIGGING DEPTH | 8.3 ft in | 2540 mm |
Dimensions
|
||
B. WIDTH TO OUTSIDE OF TRACKS | 4.9 ft in | 1500 mm |
D. LENGTH OF TRACK ON GROUND | 5.3 ft in | 1590 mm |
E. GROUND CLEARANCE | 0.82 ft in | 250 mm |
G. HEIGHT TO TOP OF CAB | 8.2 ft in | 2500 mm |
H. TAIL SWING RADIUS | 2.4 ft in | 750 mm |
O. COUNTERWEIGHT CLEARANCE | 1.7 ft in | 520 mm |
Undercarriage
|
||
N. SHOE SIZE | 9.8 in | 250 mm |
Case CX27B Specification
Engine | ||
MAKE | Yanmar | |
MODEL | 3TNV82-A-SYB | |
NET POWER | 21.3 hp | 15.9 kw |
POWER MEASURED @ | 2200 rpm | |
DISPLACEMENT | 81.1 cu in | 1.3 L |
TORQUE MEASURED @ | 1320 rpm | |
MAX TORQUE | 58.3 lb ft | 79 Nm |
NUMBER OF CYLINDERS | 3 | |
Operational | ||
OPERATING WEIGHT | 5556 lb | 2520 kg |
FUEL CAPACITY | 7.4 gal | 28 L |
COOLING SYSTEM FLUID CAPACITY | 1 gal | 3.8 L |
HYDRAUILC SYSTEM FLUID CAPACITY | 6.6 gal | 25 L |
ENGINE OIL CAPACITY | 1.5 gal | 5.5 L |
OPERATING VOLTAGE | 12 V | |
ALTERNATOR SUPPLIED AMPERAGE | 20 amps | |
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE | 3336 psi | 23000.9 kPa |
HYDRAULIC PUMP FLOW CAPACITY | 13.9 gal/min | 52.8 L/min |
Swing Mechanism | ||
SWING SPEED | 8.7 rpm | |
Undercarriage | ||
SHOE SIZE | 9.8 in | 250 mm |
NUMBER OF CARRIER ROLLERS PER SIDE | 1 | |
NUMBER OF TRACK ROLLERS PER SIDE | 4 | |
GROUND PRESSURE | 4.1 psi | 28 kPa |
MAX TRAVEL SPEED | 2.5 mph | 4.1 km/h |
DRAWBAR PULL | 6361 lb | 28.3 kN |
Buckets | ||
REFERENCE BUCKET CAPACITY | 0.08 yd3 | 0.06 m3 |
MINIMUM BUCKET CAPACITY | 0.05 yd3 | 0.04 m3 |
MAXIMUM BUCKET CAPACITY | 0.11 yd3 | 0.09 m3 |
Boom/Stick Option (HEX) 1 | ||
BOOM/STICK OPTION (HEX) 1 | Boom 7'3" (2200mm)/ Stick 3'8" (1120mm) | |
SHIPPING HEIGHT OF UNIT | 8.2 ft in | 2500 mm |
SHIPPING LENGTH OF UNIT | 13.9 ft in | 4130 mm |
MAX DIGGING DEPTH | 8.3 ft in | 2540 mm |
MAX REACH ALONG GROUND | 14.8 ft in | 4510 mm |
MAX CUTTING HEIGHT | 14.7 ft in | 4470 mm |
MAX LOADING HEIGHT | 10.4 ft in | 3170 mm |
MAX VERTICAL WALL DIGGING DEPTH | 7.6 ft in | 2320 mm |
Dimensions | ||
WIDTH TO OUTSIDE OF TRACKS | 4.9 ft in | 1500 mm |
HEIGHT TO TOP OF CAB | 8.2 ft in | 2500 mm |
GROUND CLEARANCE | 0.82 ft in | 250 mm |
COUNTERWEIGHT CLEARANCE | 1.7 ft in | 520 mm |
TAIL SWING RADIUS | 2.4 ft in | 750 mm |
LENGTH OF TRACK ON GROUND | 5.3 ft in | 1590 mm |