Suggested Thumb Attachment sizes for a Case 580L Extendahoe October 20 2014, 0 Comments
Recommended: Size based on operating weight
We suggest a
36" Mechanical - $670 FREE Shipping
36" Fully Hydraulic - $825 + FREE Shipping
To get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
For a digram follow this link to our site. > Measuring Instructions
Follow this link for specs pictures and descriptions. Click here --> Pictures of Thumbs
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
Backhoe
|
||
J. LOAD HEIGHT - STD | 11.2 ft in | 3400 mm |
K. REACH FROM SWIVEL - STD | 18.1 ft in | 5510 mm |
L. DIG DEPTH - STD | 14.4 ft in | 4390 mm |
M. REACH AT LOAD HEIGHT - STD | 8.8 ft in | 2670 mm |
Dimensions
|
||
A. TRANSPORT LENGTH | 22.8 ft in | 6950 mm |
B. TRANSPORT WIDTH | 7.2 ft in | 2180 mm |
C. TRANSPORT HEIGHT | 13.9 ft in | 4250 mm |
D. WHEELBASE | 7 ft in | 2150 mm |
E. GROUND CLEARANCE | 1.2 ft in | 371 mm |
F. HEIGHT TO TOP OF CAB | 8.8 ft in | 2690 mm |
Loader
|
||
G. CLEARANCE AT MAX DUMP HEIGHT | 8.8 ft in | 2690 mm |
H. REACH AT MAX DUMP HEIGHT | 2.5 ft in | 763 mm |
I. DIG DEPTH | 5.9 in | 149 mm |
Specification
Engine | ||
MAKE | Case | |
MODEL | Family III 445T/M2, Tier II certified | |
NET POWER | 90 hp | 67 kw |
GROSS POWER | 95 hp | 71 kw |
DISPLACEMENT | 272 cu in | 4.5 L |
POWER MEASURED @ | 2200 rpm | |
TORQUE MEASURED @ | 1500 rpm | |
NUMBER OF CYLINDERS | 4 | |
NET TORQUE RISE | 29 % | |
NET MAX TORQUE | 289 lb ft | 392 Nm |
ASPIRATION | turbocharged | |
Operational | ||
OPERATING WEIGHT 2WD | 14285 lb | 6480 kg |
MAX WEIGHT | 17545 lb | 7958 kg |
FUEL CAPACITY | 31.4 gal | 119 L |
HYDRAULIC SYSTEM FLUID CAPACITY | 31.5 gal | 119 L |
OIL SYSTEM FLUID CAPACITY | 3.6 gal | 13.6 L |
COOLING SYSTEM FLUID CAPACITY | 4.8 gal | 18 L |
TRANSMISSION FLUID CAPACITY | 5.5 gal | 20.8 L |
FRONT AXLE FLUID CAPACITY | 1.5 gal | 5.5 L |
REAR AXLE FLUID CAPACITY | 3.8 gal | 14.2 L |
TURNING RADIUS | 11 ft in | 3350 mm |
TIRE SIZE FRONT - 2WD / 4WD | 11Lx16.1/12x16.5 | |
REAR TIRES SIZE 2WD/4WD | 17.5Lx24/19.5x24 | |
OPERATING VOLTAGE | 12 V | |
ALTERNATOR SUPPLIED AMPERAGE | 90 amps | |
Transmission | ||
TYPE | 4-speed synchromesh with hydraulically actuated clutches | |
NUMBER OF FORWARD GEARS | 4 | |
NUMBER OF REVERSE GEARS | 4 | |
MAX SPEED - FORWARD | 25.5 mph | 41 km/h |
MAX SPEED REVERSE | 30.8 mph | 49.6 km/h |
Backhoe | ||
DIG DEPTH - STD | 14.4 ft in | 4390 mm |
DIG DEPTH - EXT | 18.3 ft in | 5560 mm |
REACH FROM SWIVEL - STD | 18.1 ft in | 5510 mm |
REACH FROM SWIVEL - EXT | 21.8 ft in | 6650 mm |
BUCKET DIG FORCE - STD | 12821 lb | 0 kg |
BUCKET DIG FORCE - EXT | 12821 lb | 0 kg |
LOAD AT MAX LIFT - STD | 2750 lb | 1247 kg |
LOAD AT MAX LIFT - EXT | 1350 lb | 612 kg |
LOAD HEIGHT - STD | 11.2 ft in | 3400 mm |
LOAD HEIGHT - EXT | 13.3 ft in | 4040 mm |
REACH AT LOAD HEIGHT - STD | 8.8 ft in | 2670 mm |
REACH AT LOAD HEIGHT - EXT | 11.5 ft in | 3500 mm |
Loader | ||
BUCKET CAPACITY | 0.87 yd3 | 0.67 m3 |
BUCKET WIDTH | 82 in | 2080 mm |
BUCKET BREAKOUT FORCE | 9164 lb | 40.8 kN |
LIFT CAPACITY AT FULL HEIGHT | 6182 lb | 2804 kg |
CLEARANCE AT MAX DUMP HEIGHT | 8.8 ft in | 2690 mm |
REACH AT MAX DUMP HEIGHT | 2.5 ft in | 763 mm |
DIG DEPTH | 5.9 in | 149 mm |
Hydraulic | ||
PUMP TYPE | gear-type, transmission driven | |
PUMP FLOW CAPACITY | 28.5 gal/min | 108 L/min |
RELIEF VALVE PRESSURE | 3050 psi | 0 kPa |
Dimensions | ||
TRANSPORT LENGTH | 22.8 ft in | 6950 mm |
TRANSPORT WIDTH | 7.2 ft in | 2180 mm |
TRANSPORT HEIGHT | 13.9 ft in | 4250 mm |
HEIGHT TO TOP OF CAB | 8.8 ft in | 2690 mm |
WHEELBASE | 7 ft in | 2150 mm |
GROUND CLEARANCE | 1.2 ft in |