Suggested Backhoe thumb Attachment size : Kubota L2800 October 24 2014, 0 Comments
We recently received a request for a quote on a Kubato L2800 Backhoe. In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
We offer three types of thumbs at this time, a Mechanical Thumb, a Basic Hydraulic Thumb and A Fully Hydraulic Thumb. While our Fully hydraulic Thumb is our most popular for the price keep in mind not all machines are set up for hydraulic thumbs. Please check your machine.
Measuring Instructions
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
For a digram follow this link to our site. > Measuring Instructions
Follow this link for specs pictures and descriptions. Click here --> Pictures of Thumbs
Recommended: Size based on operating weight
We suggest a
-18" Mechanical - $375. + FREE Shipping
-18" Basic Hydraulic - $585 + FREE Shipping
-18" Fully Hydraulic - $635 + FREE Shipping
or
-21" Mechanical - $390 + FREE Shipping
-21" Basic Hydraulic - $600+ FREE Shipping
-21" Fully Hydraulic - $650 + FREE Shipping
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
|
Dimensions
|
||
| A. OVERALL LENGTH | 8.9 ft in | 2705 mm |
| B. WIDTH OUTSIDE FRAME | 4.3 ft in | 1305 mm |
| C. HEIGHT TO TOP OF CAB | 7.1 ft in | 2160 mm |
| D. WHEELBASE | 5.3 ft in | 1610 mm |
| E. GROUND CLEARANCE | 13.4 in | 340 mm |
Specification
| Engine | ||
| MAKE | Kubota | |
| MODEL | L2800 Gear | |
| NET POWER | hp | kw |
| GROSS POWER | 29 hp | 21.6 kw |
| PTO POWER | 24 hp | 17.9 kw |
| POWER MEASURED @ | 2800 rpm | |
| DISPLACEMENT | 85 cu in | 1.4 L |
| NUMBER OF CYLINDERS | 3 | |
| ASPIRATION | E-TVCS indirect injection | |
| Operational | ||
| OPERATING WEIGHT | 2535.3 lb | 1150 kg |
| FUEL CAPACITY | 9 gal | 34 L |
| 3 POINT HITCH TYPE | Cat. I | |
| 3 POINT HITCH LIFT CAPACITY @ 24 INCHES | 1435.2 lb | 651 kg |
| TURNING RADIUS | 8.2 ft in | 2500 mm |
| OPERATING VOLTAGE | 12 V | |
| Transmission | ||
| TYPE | sliding gear constant mesh | |
| NUMBER OF FORWARD GEARS | 8 | |
| NUMBER OF REVERSE GEARS | 4 | |
| MAX SPEED | 13.7 mph | 22 km/h |
| Hydraulic System | ||
| PUMP FLOW CAPACITY | 6.5 gal/min | 24.7 L/min |
| Dimensions | ||
| OVERALL LENGTH | 8.9 ft in | 2705 mm |
| HEIGHT TO TOP OF CAB | 7.1 ft in | 2160 mm |
| WHEELBASE | 5.3 ft in | 1610 mm |
| GROUND CLEARANCE | 13.4 in | 340 mm |
| TIRE SIZE | front 7-16 rear 11.2-24 | |
| WIDTH OUTSIDE FRAME | 4.3 ft in | 1305 mm |