Takeuchi TB016 Hydraulic Thumb Attachment Size and Specs December 08 2014, 1 Comment

Item view

The Takeuchi TB016

The TB016 gives you a nice blend of performance and function. With a dig depth of 7 feet 10 inches and a max reach of over 13 feet, this mini excavator can really deliver on the most difficult jobsites.
  • It yields productivity and accuracy comparable to larger machines due to its precision pilot controls and four pump hydraulic system. It has a retractable track width of less than 39 inches allowing this machine to easily travel through gates and maneuver in tight residential areas where larger machines are at a disadvantage. This makes the TB016 perfectly suited for any jobsite big or small.
  • Adding a Hydraulic thumb to this machine will compliment its performance nicely. A hydraulic thumb will speed up use and functionality. Just imagine not needing to get off the machine to secure a larger object or adjust a mechanical style thumb. 
We always suggest that you measure your machine to get the most accurate size for your particular style machine and set up. For instructions click here >Measuring instructions.
  • Based off the Operating weight of 3524 lbs. we suggest a :
  • 21" Basic Hydraulic - $600
  • 21" Fully Hydraulic - $650 

 

For further specifications see below.

Selected Dimensions

Boom/Stick Option (HEX) 1
A. SHIPPING LENGTH OF UNIT 12.4 ft in 3785.6 mm
J. MAX LOADING HEIGHT 9.3 ft in 2843.8 mm
K. MAX REACH ALONG GROUND 12.8 ft in 3886.2 mm
L. MAX VERTICAL WALL DIGGING DEPTH 6.3 ft in 1905 mm
M. MAX DIGGING DEPTH 7.8 ft in 2386.6 mm
Dimensions
D. LENGTH OF TRACK ON GROUND 3.1 ft in 944.9 mm
E. GROUND CLEARANCE 0.68 ft in 205.7 mm
G. HEIGHT TO TOP OF CAB 7.5 ft in 2286 mm
H. TAIL SWING RADIUS 3.7 ft in 1127.8 mm
O. COUNTERWEIGHT CLEARANCE  ft in  mm
Undercarriage
N. SHOE SIZE 9 in 228.6 mm

Specification

Engine
MAKE Yanmar
MODEL 3TNV70-STB
GROSS POWER 13.5 hp 10.1 kw
POWER MEASURED @ 2200 rpm
DISPLACEMENT 52.1 cu in 0.85 L
TORQUE MEASURED @ 1600 rpm
MAX TORQUE 38 lb ft 51.5 Nm
NUMBER OF CYLINDERS 3
Operational
OPERATING WEIGHT 3524 lb 1598.5 kg
FUEL CAPACITY 5.5 gal 20.8 L
COOLING SYSTEM FLUID CAPACITY 0.83 gal 3.1 L
HYDRAUILC SYSTEM FLUID CAPACITY 8.9 gal 33.5 L
ENGINE OIL CAPACITY 0.75 gal 2.8 L
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 40 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 2844 psi 19608.7 kPa
HYDRAULIC PUMP FLOW CAPACITY 8.7 gal/min 32.8 L/min
Swing Mechanism
SWING SPEED 9 rpm
Undercarriage
SHOE SIZE 9 in 228.6 mm
NUMBER OF CARRIER ROLLERS PER SIDE
NUMBER OF TRACK ROLLERS PER SIDE 3
GROUND PRESSURE 3.9 psi 26.9 kPa
MAX TRAVEL SPEED 2.9 mph 4.7 km/h
Boom/Stick Option (HEX) 1
SHIPPING LENGTH OF UNIT 12.4 ft in 3785.6 mm
MAX DIGGING DEPTH 7.8 ft in 2386.6 mm
MAX REACH ALONG GROUND 12.8 ft in 3886.2 mm
MAX LOADING HEIGHT 9.3 ft in 2843.8 mm
MAX VERTICAL WALL DIGGING DEPTH 6.3 ft in 1905 mm
Dimensions
HEIGHT TO TOP OF CAB 7.5 ft in 2286 mm
GROUND CLEARANCE 0.68 ft in 205.7 mm
COUNTERWEIGHT CLEARANCE  ft in  mm
TAIL SWING RADIUS 3.7 ft in 1127.8 mm
LENGTH OF TRACK ON GROUND 3.1 ft in 944.9 mm


New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Mini+Excavator&make=Takeuchi&model=TB016&modelid=92809#ixzz3K5zA3T9X