JCB 214E Series 4 Backhoe Loader Features and Specs April 03 2015, 0 Comments

JCB 214 I 35 Equipment www.MiniExcavatorThumbs.com
Photo Provided by : www.i35Equipment.com

Features of a JCB 214 Backhoe Loader

  • Loader - Looking for a little more muscle on your job? with a lift capacity of 6750 lb. a break out force of 11730 lb. and a 1.25 cubic yard bucket this is just what you need to get the job done.
  • Backhoe - The JCB 214 offers a 14-foot backhoe stick in two options, the classic dipper or the extra dig deeper version for more reach. 
  • Heavy Duty Build - Huge rear frame supports and a unitized one piece mainframe along with grease seals at vital backhoe joints and large diameter pins and bushings make this a machine that will last.
  • Safety - Secure your machine with a signal key that locks and secures your fuel, cab , hydraulic, engine ext for your convenience. Also standard with hazards, brake lights and turning signals for added visibility. 
  • Design - Comfortable ergonomic design and panels for easy visibility and a spacious ride so you can handle long hours operating. 

 Specifications for JCB 214 Backhoe Loader

STATIC DIMENSIONS

JCB Series 4 Backhoe Loaders feature heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key.

Machine model

214e-2WD

214e-4WD

ft-in (meter)

ft-in (meter)

A Transport length

23-0 (7.01)

23-0 (7.01)

B Transportheight– Standard backhoe

11-2 (3.40)

11-2 (3.40)

C Heighttotopof cab/canopy

9-3 (2.82)

9-3 (2.82)

D Overallwidth with bucket

7-4 (2.24)

7-4 (2.24)

E Groundclearance– mainframe

1-2 (0.36)

1-2 (0.36)

F Groundclearance– front axle

1-2 (0.36)

0-10 (0.25)

G Frontwheel track

5-11 (1.80)

6-1 (1.85)

H Rear wheel track

5-5 (1.65)

5-8 (1.73)

J Wheelbase

6-11 (2.11)

7-1 (2.16)

OPERATING WEIGHTS

Operating weight includes machine equipped with standard loader bucket, 24" HD backhoe bucket and full fluid levels.

Machine model

214e-2WD

214e 4WD

lb (kg)

lb (kg)

Base unit – std backhoe

13046 (5919)

13376 (6069)

Cab, Extradig

14368 (6519)

14698 (6669)

Add for:

SAE operator

176 (80)

176 (80)

ENGINE

Four cylinder, direct injection diesel. Gear driven water pump, cast iron engine sump, spin-on oil and fuel filters, fuel/water separator, dual element air cleaner, 21” fan. Parent bore engine block, Thermostart cold start aid.

Machine model

214e-2WD

214e-4WD

Manufacturer

Perkins 1000 Series

Displacement

259 cubic inches (4.25 liters)

Aspiration

Natural

Natural

Rated Engine RPM

2200

2200

Horsepower Ratings:

HP (kW)

HP (kW)

SAE Gross

76 (56.7)

76 (56.7)

SAE Net

72 (53.7)

72 (53.7)

Maximum Torque:

lb-ft (Nm)

lb-ft (Nm)

SAE Gross

214 (291)

214 (291)

SAE Net

210 (286)

210 (286)

Max. Torque RPM

1400

1400

STEERING

Power hydrostatic system utilizing the main hydraulic pump via a steering priority valve. Emergency power off steering.

Machine model

214e-2WD

214e-4WD

Steering axles

Front

Front

Type

Hydrostatic

Steering turns – lock to lock

3.00

3.00

ft-in (meter)

ft-in (meter)

Turning circle – unbraked

25-3 (7.70)

26-5 (8.05)

Loader clearance circle

33-10 (10.31)

34-11 (10.64)

214e Series 4 BACKHOE LOADER

ENGINE SUPPORT SYSTEM

Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals.

Fuel type Fuel filter

Air cleaner Oilfilterandlubrication Cooling system

Diesel.
Replaceable spin-on cartridge plus water/sediment separator
Dual, dry element cyclonic type. Fullflow,spinontypefilter.
Hot climate specification, pressurized to 7 psi (0.5 bar), 21” suction fan. Pressurized recovery tank with integral filler neck.

ELECTRICAL & INSTRUMENTATION

12 volt negative ground, utilizing wiring and connectors meeting IP67 water and dust ingress test standard. Central fuse panel supplemented with main circuit breakers at battery positive terminal.
Gauges

Warning system

Battery Pre-wire Horn

Accessory Reverse alarm

Tachometer, engine coolant temp, fuel level, hourmeter.
Audible and visual system for engine, transmission, park brake, battery charge condition, air cleaner restriction.

12V, 850 cold cranking amps.
Pre-wire for beacon.
Front horn button mounted on forward-to- reverse lever.
12V power outlet on instrument panel. Standard fit. Meets SAE requirements.

TRANSMISSION

JCB transmissions are designed and built specifically for JCB backhoe loaders. They feature synchronized shifting in all gears and power shift between forward and reverse. Ground speeds aredesigned tomaximizeproduction.Transmissiondisconnect switches on main gear shift lever and loader control lever.

Machine model

214e-2WD

214e-4WD

Manufacturer

JCB

Type

Synchro shuttle

Torque converter

Single stage, dual phase, 11 inch diameter

Torque converter ratio

2.8:1

2.8:1

Gears forward/reverse

4 forward/4 reverse

Gear selection

Synchro shift

Synchro shift

Shuttle control – F/R

Power shuttle

Power shuttle

Travel speeds

mph (kph)

mph (kph)

Tires equipped

19.5L-24

19.5L-24

Gear 1

3.4 (5.5)

3.4 (5.5)

Gear 2

5.1 (8.2)

5.1 (8.2)

Gear 3

10.9 (17.5)

10.9 (17.5)

Gear 4

20.6 (33.2)

20.6 (33.2)

FRONT AXLE

JCB front axles are designed and built specifically for backhoe loaders and accept a variety of tire combinations.

Machine model

214e-2WD

214e-4WD

Type

Flame cut bar w/fixed tread

JCB Max- Trac Torque propor- tioning

lb (kg)

lb (kg)

Static load rating

36383 (16508)

36383 (16508)

Dynamic load rating

18300 (8303)

18300 (8303)

SAE J43 Rating

11362 (5155)

13440 (6098)

REAR AXLE

JCB rear axles are designed and built specifically for backhoe loaders and accept a variety of tire combinations.

Machine model

214e-2WD

214e-4WD

Type

JCB Max-Trac

with outboard planetary drive

Limited slip

Standard automatic rear axle traction control system

lb (kg)

lb (kg)

Static load rating

55125 (25011)

55125 (25011)

Dynamic load rating

27562 (12505)

27562 (12505)

SAE J43 Rating

12956 (5878)

12956 (5878)

OPERATOR’S AREA

Meets SAE ROPS/FOPS requirements 17632lb (8000kg) GVW capacity. Standard features include the following:

Cab

Canopy

Heavy duty suspension seat

opt

opt

Heavy duty fixed pedestal seat

X

X

Heater/pressurizer

X

Front and rear wipers

X

Front and rear window washers

X

2" seat belt (3" option)

X

X

4 front and 2 rear work lamps

X

X

12V power outlet

X

X

Instrument vandal cover

X

Brake lights, hazard lamps, turn signals

X

X

Interior rear view mirror

X

X

Side-mounted instrument panel

X

X

Deluxe floor mat

X

X

Cup holder

X

X