Case CX31 Mini Excavator Thumb Attachment Size April 14 2015, 0 Comments

Case CX 31 mini excavator thumb

Case CX31 Suggested Thumb Size 

The Case CX31 is a tough compact excavator as is but if you want to improve the performance, capability and over all capacity of this machine you may want to reinvest in a thumb attachment. With one simple weld on thumb you can improve your operating ability, secure material safely on-site and much more. Ask anyone thats ever operated an excavator, this one attachment is well worth the cost. Especially and prices up to 45 % off MSRP.  

For this Case cx31 miniexcavatorthumbs.com suggests a 24" thumb attachment based on the operating weight of the machine. 

Thumb Prices for a Case cx31

Click the links below for pricing and specs -

The style thumb you select will depend on your specific needs and may very from job to job. You will also need to make sure that your machine is plumbed for a hydraulic thumb if thats what your looking for. We currently carry 3 different styles of thumbs Manual, Basic Hydraulic and Fully Hydraulic.

Manual thumbs require you to move the pins in order to adjust the position of the thumb. The basic hydraulic is a cross between the manual and fully hydraulic, it allows you to adjust the position with the us of hydraulics however to fully retract the thumb when not in use you must remove a pin. The fully hydraulic allows for complete automation.

In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Measuring Instructions for a Backhoe thumb
 
1. Place the stick of the machine straight and the bucket angle to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.