Kobelco 35sr-3 Mini Excavator Features and Specs May 14 2015, 0 Comments

Kobelco 35sr-3 Features :

Improved Digging Performance - Hourly digging capacity and speed are greatly increased due to the larger capacity engine and the new Integrated Flow pump system. This machine is now more responsive with shorter cycle time.
Integrated Flow Pump System (Three Pumps) - When you start digging you'll experience a smoother arm operation with heavy loads thanks to extra output from the third pump that shifts to the arm circuit for more power.
Travel Torque - Large Capacity travel motors provide all the necessary power to the tracks for an added push in rough or swampy terrain with auto tactic two speed travel system. Getting you where you need to go faster.

Boom/Stick Option (HEX) 1
A. SHIPPING LENGTH OF UNIT	15.5 ft in	4710 mm
C. SHIPPING HEIGHT OF UNIT	8.4 ft in	2570 mm
I. MAX CUTTING HEIGHT	16.3 ft in	4980 mm
J. MAX LOADING HEIGHT	11.7 ft in	3580 mm
K. MAX REACH ALONG GROUND	16.8 ft in	5110 mm
L. MAX VERTICAL WALL DIGGING DEPTH	7.8 ft in	2390 mm
M. MAX DIGGING DEPTH	10.1 ft in	3080 mm
Dimensions
B. WIDTH TO OUTSIDE OF TRACKS	5.6 ft in	1700 mm
D. LENGTH OF TRACK ON GROUND	5.6 ft in	1700 mm
E. GROUND CLEARANCE	1.1 ft in	330 mm
G. HEIGHT TO TOP OF CAB	8.4 ft in	2570 mm
H. TAIL SWING RADIUS	2.8 ft in	850 mm
O. COUNTERWEIGHT CLEARANCE	1.9 ft in	570 mm
Undercarriage
F. TRACK GAUGE	4.6 ft in	1400 mm
N. SHOE SIZE	11.8 in	300 mm

Engine
MAKE	Yanmar
MODEL	3TNV88-PYB
NET POWER	28.4 hp	21.2 kw
POWER MEASURED @	2400 rpm
DISPLACEMENT	100.2 cu in	1.6 L
NUMBER OF CYLINDERS	3
Operational
OPERATING WEIGHT	8380 lb	3801.1 kg
FUEL CAPACITY	10 gal	38 L
HYDRAUILC SYSTEM FLUID CAPACITY	12.7 gal	48 L
OPERATING VOLTAGE	12 V
ALTERNATOR SUPPLIED AMPERAGE	40 amps
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE	3336 psi	23000.9 kPa
HYDRAULIC PUMP FLOW CAPACITY	28.6 gal/min	108.3 L/min
Swing Mechanism
SWING SPEED	8.9 rpm
SWING TORQUE	752 lb ft	1019.6 Nm
Undercarriage
SHOE SIZE	11.8 in	300 mm
GROUND PRESSURE	4.7 psi	32.4 kPa
MAX TRAVEL SPEED	2.8 mph	4.5 km/h
DRAWBAR PULL	8587 lb	38.2 kN
TRACK GAUGE	4.6 ft in	1400 mm
Buckets
REFERENCE BUCKET CAPACITY	0.12 yd3	0.09 m3
Boom/Stick Option (HEX) 1
BOOM/STICK OPTION (HEX) 1	Stick 4'4" (1320mm)
SHIPPING HEIGHT OF UNIT	8.4 ft in	2570 mm
SHIPPING LENGTH OF UNIT	15.5 ft in	4710 mm
MAX DIGGING DEPTH	10.1 ft in	3080 mm
MAX REACH ALONG GROUND	16.8 ft in	5110 mm
MAX CUTTING HEIGHT	16.3 ft in	4980 mm
MAX LOADING HEIGHT	11.7 ft in	3580 mm
MAX VERTICAL WALL DIGGING DEPTH	7.8 ft in	2390 mm
Dimensions
WIDTH TO OUTSIDE OF TRACKS	5.6 ft in	1700 mm
HEIGHT TO TOP OF CAB	8.4 ft in	2570 mm
GROUND CLEARANCE	1.1 ft in	330 mm
COUNTERWEIGHT CLEARANCE	1.9 ft in	570 mm
TAIL SWING RADIUS	2.8 ft in	850 mm
LENGTH OF TRACK ON GROUND	5.6 ft in	1700 mm