Gehl Z25 Compact Excavator Specs July 15 2015, 0 Comments
Gehl z25 Specifications
Specs for this Gehl Z25 Compact are provided by MiniExcavatorThumbs.com . If you want to add a weld on thumb to your Z25 Mini Excavator we offer a full product line of mechanical and hydraulic thumbs for Gehls just like this. Check out our site today.
Dimensions | |
|---|---|
| Operating Weight with Canopy | 5,919 lbs. |
| Operating Weight with Cab | 6,217 lbs. |
| A Max. Digging Depth | 9' 8" |
| B Max. Vertical Wall Digging Depth | 7' 9" |
| C Max. Reach at Ground Level | 15' 9" |
| D Transport Length | 13' 5" |
| E Undercarriage Length | 6' 8" |
| F Max. Digging Height | 14' 8.4" |
| G Max. Dump Height | 9' 1.4" |
| H Minimum Front Swing Radius | 7' 1" |
| I Transport Height - Cab/Canopy | 8' 3.6" / 8' 2" |
| J Blade Below Ground | 1' 2" |
| K Overall Base Width | 4' 11.1" |
| L Track Width | 9.8" |
| M Ground Clearance | 1' 0.6" |
| N Parallel Offset Right | 1' 7" |
| O Parallel Offset Left | 2' 3" |
| P Rear End Swing Radius | 2' 5.5" |
| Q Boom Swing Angle - Left | 47° |
| R Boom Swing Angle - Right | 74° |
| Max. Dig Depth with 8 ft. Flat Bottom | 8' 2.4" |
| Dozer Blade Width | 4' 11.1" |
Engine | |
| Make | Yanmar |
| Model | 3TNV80F Tier IV |
| Type | Diesel |
| Displacement | 77.3 cu.in. |
| Gross Power @ rpm | 20.4 hp @ 2500 |
| Net Power @ rpm | 19.7 hp @ 2500 |
| Fuel Tank | 8.1 gal. |
| Fuel Consumption | 0.95 gal./hr. |
Hydraulic System | |
| Pumps | 2 variable, 2 gear |
| Total Flow Rate | 13.6 gpm |
| Working Pressure | 2987 psi |
| Swing System Pressure | 2103 psi |
| Oil Cooler | Standard |
| Hydraulic Tank | 6.6 gal. |
Undercarriage And Slewing System | |
| Travel Speed - dual | 1.7 / 2.8 mph |
| Gradability | 20° |
| Track Type/Width | Rubber / 9.8" |
| No. of Rollers per Side (track/idle) | 4/1 |
| Track Length on Ground | 5' 8.8" |
| Ground Clearance | 12.6" |
| Ground Pressure - Cab/Canopy | 4.6 / 4.4 psi |
| Slew Speed | 10 rpm |
| Maximum Drawbar Pull | 5,490 lbs. |
| Maximum Bucket Breakout | 4,079 lbs. |
| Maximum Arm Digging Force | 2,624 lbs. |