Yanmar Vio35 Mini Excavator Specifications July 18 2015, 4 Comments
Yanmar Mini Excavator
The specifications for this Yanmar provided by www.MiniExcavatorThumbs.com . We carry weld on thumb attachments for the Yanmar Vio 35 with a full line of mechanical and hydraulic thumbs for backhoes like this machine we are sure to have what you are looking for.
Yanmar has been providing top of the line service in equipment for over 100 years. With their introduction of the first mini excavator in 1971 they have lead the construction industry with innovation after innovation. With features such as zero tail swing, to fuel efficiency the Vio 35 will prove to be the perfect tool for your job site.
Yanmar Vio 35 Specs
Boom/Stick Option (HEX) 1
|
||
A. SHIPPING LENGTH OF UNIT | 15.2 ft in | 4640 mm |
C. SHIPPING HEIGHT OF UNIT | 8.2 ft in | 2510 mm |
J. MAX LOADING HEIGHT | 11.6 ft in | 3550 mm |
K. MAX REACH ALONG GROUND | 17.1 ft in | 5220 mm |
L. MAX VERTICAL WALL DIGGING DEPTH | 9.4 ft in | 2850 mm |
M. MAX DIGGING DEPTH | 10.8 ft in | 3300 mm |
Dimensions
|
||
B. WIDTH TO OUTSIDE OF TRACKS | 5.1 ft in | 1550 mm |
D. LENGTH OF TRACK ON GROUND | 7 ft in | 2120 mm |
E. GROUND CLEARANCE | 1 ft in | 320 mm |
H. TAIL SWING RADIUS | 2.5 ft in | 775 mm |
Undercarriage
|
||
N. SHOE SIZE | 11.8 in | 300 mm |
Specification
Engine | ||
MAKE | Yanmar | |
MODEL | 3TNV88-BQBVB | |
GROSS POWER | 28 hp | 20.9 kw |
POWER MEASURED @ | 2300 rpm | |
DISPLACEMENT | 100.1 cu in | 1.6 L |
NUMBER OF CYLINDERS | 3 | |
Operational | ||
OPERATING WEIGHT | 8443.7 lb | 3830 kg |
HYDRAULIC SYSTEM RELIEF VALVE PRESSURE | 2987.8 psi | 20600 kPa |
HYDRAULIC PUMP FLOW CAPACITY | 20.4 gal/min | 77.2 L/min |
Undercarriage | ||
SHOE SIZE | 11.8 in | 300 mm |
MAX TRAVEL SPEED | 2.9 mph | 4.6 km/h |
Buckets | ||
REFERENCE BUCKET CAPACITY | 0.17 yd3 | 0.13 m3 |
Boom/Stick Option (HEX) 1 | ||
SHIPPING HEIGHT OF UNIT | 8.2 ft in | 2510 mm |
SHIPPING LENGTH OF UNIT | 15.2 ft in | 4640 mm |
MAX DIGGING DEPTH | 10.8 ft in | 3300 mm |
MAX REACH ALONG GROUND | 17.1 ft in | 5220 mm |
MAX LOADING HEIGHT | 11.6 ft in | 3550 mm |
MAX VERTICAL WALL DIGGING DEPTH | 9.4 ft in | 2850 mm |
Dimensions | ||
WIDTH TO OUTSIDE OF TRACKS | 5.1 ft in | 1550 mm |
GROUND CLEARANCE | 1 ft in | 320 mm |
TAIL SWING RADIUS | 2.5 ft in | 775 mm |
LENGTH OF TRACK ON GROUND | 7 ft in | 2120 mm |
Comments
Anthony - Customer Support on February 06 2018 at 03:28PM
Hi Rob,
Unfortunately I’m not familiar with the brush cutter attachments for the Yanmar Vio 35 but you should be able to contact your local Myanmar dealer to find the answer your looking for.
Best,
Anthony
Colin burton on January 24 2018 at 01:39AM
Hello I have an yanmar via 35. My question is can I run an brush cutter and if yes what size can I go to can I go bigger than 36 inch
Anthony - Customer Support - MiniExcavatorThumbs.com on June 20 2017 at 01:40PM
Hi Rob,
The lifting capacity of the Yanmar Via 35 depends on a few different factors such as the Lift point height and position of the machine but to help you our check out this link https://www.yanmar.com/us/wp-content/uploads/2016/02/ViO35-6A_-web.pdf
The max is probably 3800 lbs. all things considered.
Best,
Anthony
Rob on June 19 2017 at 01:34PM
Can you tell me how much weight this machine can lift?