There is a lot of upcoming working in Connecticut according to cmdgroup.com. With all this potential work it is now more important than ever to get the job done right.
Any good contractor in Connecticut can tell you how important the over all ability to move material across a job site safely and quickly is to the bottom line.
One way to improve operating and safety is to add a thumb attachment to your machine allowing you to secure any number of materials you find yourself moving on site.
Benefits of adding a thumb attachment :
- Improve safety and security for your employees and yourself
- Cut cost of damaged material due to poor handling
- Increase the speed and time spent on a job site.
- Larger profits due to less labor cost.
Our Offer :
- Factory direct pricing up to 45% off competition
- Mechanical and hydraulic thumbs sizes 18" - 36" in stock
- Free shipping nation wide within 57 business days
Features:
- 7 inches wide
- Made from 1/2" thick USA high grade steel
- Heavy duty design
- Fully retractable
- Hydraulic and Mechanical available
Check out our Mechanical thumb attachments that start at $375 and our basic hydraulic mini thumb attachments which sell for as low as $585. With these kind of prices its clear that we are looking to offer our customers the best value possible.
To get a quote today call Andrew at (216) 210-6776.
Construction firms are hiring again! According to a press release from the Associated General Contractors of America construction firms added 48,000 jobs in December. This means that there is an increase in the amount of over all construction related work through out the nation.
With new work available it is important for you as a contractor to be able to provide the best possible service at a low cost to gain new and repeat business.
Give yourself an instant return on investment and purchase a thumb attachment for your excavator or backhoe.
By adding a Thumb Attachment to your compact excavator you are are doing much more than increasing the over all value of the machine. You will benefit from added control that will prove useful for any part of your job. Gaining increased performance while operating and handling material will speed up productivity , saving you on labor cost and head aches associate with operating an excavator.
You can purchase a new thumb for up to 45% off msrp with our factory direct pricing on all size thumbs. Our competitors can't even come close.
Click here to view our Mechanical thumbs starting at $375 or Hydraulic thumbs starting at $585
We have an inventory or 18 inch - 36 inch Mechanical and hydraulic compact excavator thumb attachments in stock. With Free shipping anywhere in the Nation in 5-7 business days you are sure to find a great value.
If your looking for a Heavy Duty Mini Excavator Thumb look no further. At 7" wide and made from 1/2: thick USA High grade steel, you can trust that these thumbs are built to last.
Our goal is simple, we want to deliver factory direct pricing on high quality equipment attachments to all of our customers. We are here to stay and looking to built your trust and gain your business one product at a time. Give andrew a call at (216) 210- 6776 for a quote.
According to SouthCarolinaConstrutionNews.com's article and the fourth quarter 2013 Retail Market Report , commercial reals estate is starting to heat up in South Carolina. As an contractor that hopefully translates into more work for you.
With more work and an up tick in the economy it's now more important than ever to make a great impression on the job site. So how exactly can you do that? Find ways to decrease costs and improve productivity.
One way to do that is to invest in equipment that will give you an return on invest from the first day of use. So what is this piece of equipment that will save you time and money?
A Mini Excavator Thumb will stop the likely hood of you from damaging material or needing to take the time to get off the machine to adjust and secure a load.
At MiniExcavatorThumbs.com we carry 18" - 36" thumb attachments in stock. Our factory direct pricing up to 45% off the MSRP plus Free Shipping to anywhere in the nation within 5 -7 business days keeps our customers coming back.
Our Thumbs are 7" wide and made from 1/2" USA High Grade steel. A Heavy Duty Design makes this one attachment that will last you for years to come. Making sure you get your money worth out of it.
If you end up needing something bigger we also design and manufacture larger thumbs. To find out what size your machine calls for view are thumb attachment size chart or measuring instructions.
-
Mechanical Thumb Attachments start at $375
- Hydraulic Thumb Attachments starting at $585
We aim to beat out the competition in size, price and service. Looking to gain your business for years to come. If you want a quote call Andrew at (216) 210 - 6776.
If there is one thing that happens often in New Jersey it is construction and hard work. But if we can find a way to make that hard work a easier and save some money at the same time its a win win.
Humans have thumbs for a reason, they make life easier. Isn't that the reason we use machine on job sites anyway?Adding a thumb to your excavator or backhoe can make life much easier.
Give your excavator added control that will allow you to move a variety of material including boulders, trees, hardscape etc. By adding a thumb you gain the ability to secure your material. In the long run you'll save time and money on your project.
Our thumbs are 7" wide and made from 1/2 thick USA Grade Steel. With a heavy duty build our thumb attachments are bigger and better in every way. Making sure that you can depend on your thumb day in and day out.
MiniExcavatorThumbs.com offers factory direct pricing up to 45% off the MSRP to all our customers. Add to that FREE shipping nationwide within 5-7 business days on all thumbs and the fact that we carry sizes between 18"-36" in stock and you've got an amazing deal.
If you measure your machine and need something bigger, we can customer build a thumb for your machine. To find out exactly what size you need visit our article on measuring for your thumb.
Our goal is to deliver deep factory discounts on heavy duty, high quality products to our customers. We will move mountains for you, to gain your business the old fashion way. By delivering great service and a great product, securing your business for life,
To get a quote today give Andrew a call at (216) 210 - 6776
Florida is slowly but surely starting to pick back up from the effects of the recession. As the economy bounces back so have a lot of the construction and excavation jobs. This means you need to make a good imprecision on every job and make it count.
If your tired of damaging material on the job site your trying to pick-up with your Mini Excavator or Backhoe, adding a thumb Attachment can fix your problem and save you wasted time.
A Thumb attachment will give your excavator added control and stability while carrying a variety of material including boulders, trees, hardscape etc. With more control and the ability to secure any material you'll find that you save big on time and money over the long term by cutting down on damage and labor costs.
Our thumbs are 7" wide and made from 1/2 " thick USA High Grade steel. This Heavy duty design is just a little big and better in every way making sure that you can rely and depend on our thumbs day after day, in any conditions.
We Offer Factory Direct pricing up to 45% off the MSRP and free Shipping to Anywhere Nationwide within 5-7 business days on all thumbs. We carry sizes between 18" - 36" in stock.
Need something bigger? No worries we can custom build something larger. to find out exactly what size you need visit our article on measuring instructions .
Our Mechanical excavator and backhoe thumb attachments start as low as $375 and Hydraulic Thumbs starting as low as $585.
Our goal is to deliver deep factory discounts on heavy duty, high quality products to each and ever one of our customers. We are here for the long haul and want to gain your business the old fashion way by delivering great services and a great product, securing your business for life.
To get a quote today give Andrew a call at (216)215-4186.
The Caterpillar E70B Excavator :
The Cat E70B has a Mitsubishi 4D32 engine, giving it plenty of power for a compact machine. It comes standard with a variable flow hydraulic system with a power and work mode selector, pilot activated controls, straight-line travel, and an H-shaped carbody. These features add to the appeal of the E70B
While many of these features make operating this mini excavator much easy there is no better addition than a thumb attachment. Adding a thumb to your machine adds value in many ways. Some of these include :
- More stability when moving loads
- Less damage to material
- Ease of transporting large material
- Increased on site safety
For this particular machine we suggest a:
36" Mechanical Thumb- $645 + Free Shipping.
36" Basic Hydraulic - $755 + Free Shipping
36" Fully Hydraulic - $799 + Free Shipping
Selected Dimensions
| I. MAX CUTTING HEIGHT |
21.3 ft in |
6505 mm |
| J. MAX LOADING HEIGHT |
14.6 ft in |
4460 mm |
| K. MAX REACH ALONG GROUND |
19.5 ft in |
5930 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
10.1 ft in |
3070 mm |
| M. MAX DIGGING DEPTH |
12.4 ft in |
3780 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
7.4 ft in |
2260 mm |
| D. LENGTH OF TRACK ON GROUND |
6.6 ft in |
2000 mm |
| E. GROUND CLEARANCE |
0.98 ft in |
300 mm |
| G. HEIGHT TO TOP OF CAB |
8.4 ft in |
2570 mm |
| H. TAIL SWING RADIUS |
5.7 ft in |
1750 mm |
| O. COUNTERWEIGHT CLEARANCE |
2.6 ft in |
780 mm |
| F. TRACK GAUGE |
5.7 ft in |
1750 mm |
| N. SHOE SIZE |
17.7 in |
450 mm |
Specification
| MAKE |
Mitsubishi |
| MODEL |
4D32 |
| GROSS POWER |
hp |
kw |
| NET POWER |
54 hp |
40.3 kw |
| POWER MEASURED @ |
1800 rpm |
| DISPLACEMENT |
217.9 cu in |
3.6 L |
| OPERATING WEIGHT |
15256 lb |
6920 kg |
| FUEL CAPACITY |
29.1 gal |
110 L |
| COOLING SYSTEM FLUID CAPACITY |
4.2 gal |
16 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
27.7 gal |
105 L |
| ENGINE OIL CAPACITY |
2.4 gal |
9 L |
| SWING DRIVE FLUID CAPACITY |
1.1 gal |
4 L |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
50 amps |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
4551 psi |
31378 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
35.4 gal/min |
134 L/min |
| SWING SPEED |
13.5 rpm |
| NUMBER OF SHOES PER SIDE |
42 |
| SHOE SIZE |
17.7 in |
450 mm |
| NUMBER OF TRACK ROLLERS PER SIDE |
5 |
| GROUND PRESSURE |
4.7 psi |
32.4 kPa |
| MAX TRAVEL SPEED |
2.5 mph |
4.1 km/h |
| DRAWBAR PULL |
10141 lb |
45.1 kN |
| TRACK GAUGE |
5.7 ft in |
1750 mm |
| REFERENCE BUCKET CAPACITY |
0.37 yd3 |
0.28 m3 |
| MINIMUM BUCKET CAPACITY |
0.18 yd3 |
0.14 m3 |
| MAXIMUM BUCKET CAPACITY |
0.44 yd3 |
0.34 m3 |
| BOOM/STICK OPTION (HEX) 1 |
One-piece boom w/ Stick 4'6" (1390mm) |
| MAX DIGGING DEPTH |
12.4 ft in |
3780 mm |
| MAX REACH ALONG GROUND |
19.5 ft in |
5930 mm |
| MAX CUTTING HEIGHT |
21.3 ft in |
6505 mm |
| MAX LOADING HEIGHT |
14.6 ft in |
4460 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
10.1 ft in |
3070 mm |
| BOOM/STICK OPTION (HEX) 2 |
One-piece boom w/ Stick 5'11" (1720mm) |
| MAX DIGGING DEPTH |
13.5 ft in |
4110 mm |
| MAX REACH ALONG GROUND |
20.5 ft in |
6245 mm |
| MAX CUTTING HEIGHT |
22.1 ft in |
6725 mm |
| MAX LOADING HEIGHT |
15.3 ft in |
4660 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
11.6 ft in |
3530 mm |
| BOOM/STICK OPTION (HEX) 3 |
One-piece boom w/ Stick 7'8" (2210mm) |
| MAX DIGGING DEPTH |
15.1 ft in |
4595 mm |
| MAX REACH ALONG GROUND |
22 ft in |
6720 mm |
| MAX CUTTING HEIGHT |
23 ft in |
7025 mm |
| MAX LOADING HEIGHT |
16.3 ft in |
4960 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
13 ft in |
3965 mm |
| WIDTH TO OUTSIDE OF TRACKS |
7.4 ft in |
2260 mm |
| HEIGHT TO TOP OF CAB |
8.4 ft in |
2570 mm |
| GROUND CLEARANCE |
0.98 ft in |
300 mm |
| COUNTERWEIGHT CLEARANCE |
2.6 ft in |
780 mm |
| TAIL SWING RADIUS |
5.7 ft in |
1750 mm |
| LENGTH OF TRACK ON GROUND |
6.6 ft in |
2000 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Midi+Excavator&make=Caterpillar&model=E70B&modelid=92869#ixzz3O4AOLeUV
This Cat Backhoe offers a spacious cab for comfort all day long. It was built for true performance and power. With a strong lift and break out as well as a superior digging force you would find it hard to not be able to handle any job.
If your considering adding a backhoe thumb for even more control and improved operating we recommend our 36" fully hydraulic.
Thumb attachment Size
- 36" Back hoe Thumb - Mech $645, Basic $755, Fully $799
Selected Dimensions
| J. LOAD HEIGHT - STD |
10.9 ft in |
3335 mm |
| K. REACH FROM SWIVEL - STD |
17.8 ft in |
5413 mm |
| L. DIG DEPTH - STD |
14.2 ft in |
4330 mm |
| M. REACH AT LOAD HEIGHT - STD |
7.2 ft in |
2195 mm |
| A. TRANSPORT LENGTH |
22.4 ft in |
6838 mm |
| B. TRANSPORT WIDTH |
7.4 ft in |
2262 mm |
| C. TRANSPORT HEIGHT |
11.3 ft in |
3448 mm |
| D. WHEELBASE |
6.9 ft in |
2100 mm |
| E. GROUND CLEARANCE |
0.97 ft in |
297 mm |
| F. HEIGHT TO TOP OF CAB |
8.9 ft in |
2719 mm |
| G. CLEARANCE AT MAX DUMP HEIGHT |
8.7 ft in |
2637 mm |
| H. REACH AT MAX DUMP HEIGHT |
2.3 ft in |
704 mm |
| I. DIG DEPTH |
4.2 in |
107 mm |
Specification
| MAKE |
Perkins |
| MODEL |
4.2 |
| NET POWER |
61.7 hp |
46 kw |
| GROSS POWER |
67.1 hp |
50 kw |
| DISPLACEMENT |
235.6 cu in |
3.9 L |
| POWER MEASURED @ |
2400 rpm |
| NUMBER OF CYLINDERS |
4 |
| OPERATING WEIGHT 2WD |
13706.1 lb |
6217 kg |
| OPERATING WEIGHT 4WD |
13970.7 lb |
6337 kg |
| FUEL CAPACITY |
28 gal |
106 L |
| HYDRAULIC SYSTEM FLUID CAPACITY |
20.9 gal |
79 L |
| OIL SYSTEM FLUID CAPACITY |
1.8 gal |
7 L |
| COOLING SYSTEM FLUID CAPACITY |
5.5 gal |
21 L |
| TRANSMISSION FLUID CAPACITY |
2.6 gal |
10 L |
| FRONT AXLE FLUID CAPACITY |
2 gal |
7.5 L |
| REAR AXLE FLUID CAPACITY |
4.9 gal |
18.5 L |
| TURNING RADIUS |
12.8 ft in |
3905 mm |
| TIRE SIZE FRONT - 2WD / 4WD |
11L-16 10PR/10.5-20 10PR |
| REAR TIRES SIZE 2WD/4WD |
16.9-24 8PR/ 19.5L-24 8PR |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
52 amps |
| TYPE |
fully synchromesh |
| NUMBER OF FORWARD GEARS |
4 |
| NUMBER OF REVERSE GEARS |
4 |
| MAX SPEED - FORWARD |
19.7 mph |
31.7 km/h |
| MAX SPEED REVERSE |
19.8 mph |
31.8 km/h |
| DIG DEPTH - STD |
14.2 ft in |
4330 mm |
| DIG DEPTH - EXT |
18.5 ft in |
5636 mm |
| REACH FROM SWIVEL - STD |
17.8 ft in |
5413 mm |
| REACH FROM SWIVEL - EXT |
21.9 ft in |
6661 mm |
| BUCKET DIG FORCE - STD |
10440 lb |
4735.5 kg |
| BUCKET DIG FORCE - EXT |
10260 lb |
4653.9 kg |
| LOAD AT MAX LIFT - STD |
3439.2 lb |
1560 kg |
| LOAD AT MAX LIFT - EXT |
2149.5 lb |
975 kg |
| LOAD HEIGHT - STD |
10.9 ft in |
3335 mm |
| LOAD HEIGHT - EXT |
13.3 ft in |
4044 mm |
| REACH AT LOAD HEIGHT - STD |
7.2 ft in |
2195 mm |
| REACH AT LOAD HEIGHT - EXT |
10.4 ft in |
3174 mm |
| BUCKET CAPACITY |
0.99 yd3 |
0.76 m3 |
| BUCKET WIDTH |
89.1 in |
2262 mm |
| BUCKET BREAKOUT FORCE |
7508.6 lb |
33.4 kN |
| LIFT CAPACITY AT FULL HEIGHT |
5249.2 lb |
2381 kg |
| CLEARANCE AT MAX DUMP HEIGHT |
8.7 ft in |
2637 mm |
| REACH AT MAX DUMP HEIGHT |
2.3 ft in |
704 mm |
| DIG DEPTH |
4.2 in |
107 mm |
| PUMP TYPE |
Variable flow |
| PUMP FLOW CAPACITY |
28.5 gal/min |
108 L/min |
| RELIEF VALVE PRESSURE |
2700 psi |
18615.8 kPa |
| TRANSPORT LENGTH |
22.4 ft in |
6838 mm |
| TRANSPORT WIDTH |
7.4 ft in |
2262 mm |
| TRANSPORT HEIGHT |
11.3 ft in |
3448 mm |
| HEIGHT TO TOP OF CAB |
8.9 ft in |
2719 mm |
| WHEELBASE |
6.9 ft in |
2100 mm |
| GROUND CLEARANCE |
0.97 ft in |
297 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Loader+Backhoe&make=Caterpillar&model=416+Series+II&modelid=92022#ixzz3LKEexhNZ
Adding a Thumb attachment to your Komatsu can increase the speed and productivity of any job site. More control leads to less damage and less damage leads to faster turnaround. This machine is small enough to get into a tight spot and strong enough to get any job done. We base all suggested sizes off the operating weight of the machine.
Suggested Thumb Attachment Size
- 30" Thumb
- Operating weight 10295b
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
17.1 ft in |
5215 mm |
| C. SHIPPING HEIGHT OF UNIT |
8.5 ft in |
2590 mm |
| I. MAX CUTTING HEIGHT |
17 ft in |
5190 mm |
| J. MAX LOADING HEIGHT |
11.6 ft in |
3530 mm |
| K. MAX REACH ALONG GROUND |
18.1 ft in |
5510 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
8.9 ft in |
2700 mm |
| M. MAX DIGGING DEPTH |
11.2 ft in |
3400 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
6.4 ft in |
1960 mm |
| G. HEIGHT TO TOP OF CAB |
8.5 ft in |
2590 mm |
| H. TAIL SWING RADIUS |
3.5 ft in |
1060 mm |
| F. TRACK GAUGE |
5.1 ft in |
1560 mm |
| N. SHOE SIZE |
15.7 in |
400 mm |
Specification
| MAKE |
Komatsu |
| MODEL |
4D84E-3EC |
| NET POWER |
37.8 hp |
28.2 kw |
| POWER MEASURED @ |
2500 rpm |
| DISPLACEMENT |
121.7 cu in |
2 L |
| ASPIRATION |
Natural |
| OPERATING WEIGHT |
10295.6 lb |
4670 kg |
| FUEL CAPACITY |
15.9 gal |
60 L |
| COOLING SYSTEM FLUID CAPACITY |
2 gal |
7.5 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
18 gal |
68 L |
| ENGINE OIL CAPACITY |
2.3 gal |
8.6 L |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
3843.5 psi |
26500 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
29.1 gal/min |
110 L/min |
| SWING SPEED |
9 rpm |
| SHOE SIZE |
15.7 in |
400 mm |
| GROUND PRESSURE |
3.8 psi |
26.5 kPa |
| MAX TRAVEL SPEED |
2.7 mph |
4.3 km/h |
| TRACK GAUGE |
5.1 ft in |
1560 mm |
| BOOM/STICK OPTION (HEX) 1 |
arm w/ stick 1380mm |
| SHIPPING HEIGHT OF UNIT |
8.5 ft in |
2590 mm |
| SHIPPING LENGTH OF UNIT |
17.1 ft in |
5215 mm |
| MAX DIGGING DEPTH |
11.2 ft in |
3400 mm |
| MAX REACH ALONG GROUND |
18.1 ft in |
5510 mm |
| MAX CUTTING HEIGHT |
17 ft in |
5190 mm |
| MAX LOADING HEIGHT |
11.6 ft in |
3530 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
8.9 ft in |
2700 mm |
| BOOM/STICK OPTION (HEX) 2 |
arm w/ stick 1900mm |
| SHIPPING HEIGHT OF UNIT |
8.5 ft in |
2590 mm |
| SHIPPING LENGTH OF UNIT |
17.1 ft in |
5215 mm |
| MAX DIGGING DEPTH |
12.8 ft in |
3890 mm |
| MAX REACH ALONG GROUND |
19.8 ft in |
6025 mm |
| MAX CUTTING HEIGHT |
17.7 ft in |
5395 mm |
| MAX LOADING HEIGHT |
12.2 ft in |
3725 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
10.2 ft in |
3110 mm |
| WIDTH TO OUTSIDE OF TRACKS |
6.4 ft in |
1960 mm |
| HEIGHT TO TOP OF CAB |
8.5 ft in |
2590 mm |
| TAIL SWING RADIUS |
3.5 ft in |
1060 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Midi+Excavator&make=Komatsu&model=PC40+MRx&modelid=92776#ixzz3LKCC6y7w
The Takeuchi TB016
The TB016 gives you a nice blend of performance and function. With a dig depth of 7 feet 10 inches and a max reach of over 13 feet, this mini excavator can really deliver on the most difficult jobsites.
- It yields productivity and accuracy comparable to larger machines due to its precision pilot controls and four pump hydraulic system. It has a retractable track width of less than 39 inches allowing this machine to easily travel through gates and maneuver in tight residential areas where larger machines are at a disadvantage. This makes the TB016 perfectly suited for any jobsite big or small.
- Adding a Hydraulic thumb to this machine will compliment its performance nicely. A hydraulic thumb will speed up use and functionality. Just imagine not needing to get off the machine to secure a larger object or adjust a mechanical style thumb.
We always suggest that you measure your machine to get the most accurate size for your particular style machine and set up. For instructions click here >
Measuring instructions.
- Based off the Operating weight of 3524 lbs. we suggest a :
- 21" Basic Hydraulic - $600
-
21" Fully Hydraulic - $650
For further specifications see below.
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
12.4 ft in |
3785.6 mm |
| J. MAX LOADING HEIGHT |
9.3 ft in |
2843.8 mm |
| K. MAX REACH ALONG GROUND |
12.8 ft in |
3886.2 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
6.3 ft in |
1905 mm |
| M. MAX DIGGING DEPTH |
7.8 ft in |
2386.6 mm |
| D. LENGTH OF TRACK ON GROUND |
3.1 ft in |
944.9 mm |
| E. GROUND CLEARANCE |
0.68 ft in |
205.7 mm |
| G. HEIGHT TO TOP OF CAB |
7.5 ft in |
2286 mm |
| H. TAIL SWING RADIUS |
3.7 ft in |
1127.8 mm |
| O. COUNTERWEIGHT CLEARANCE |
ft in |
mm |
| N. SHOE SIZE |
9 in |
228.6 mm |
Specification
| MAKE |
Yanmar |
| MODEL |
3TNV70-STB |
| GROSS POWER |
13.5 hp |
10.1 kw |
| POWER MEASURED @ |
2200 rpm |
| DISPLACEMENT |
52.1 cu in |
0.85 L |
| TORQUE MEASURED @ |
1600 rpm |
| MAX TORQUE |
38 lb ft |
51.5 Nm |
| NUMBER OF CYLINDERS |
3 |
| OPERATING WEIGHT |
3524 lb |
1598.5 kg |
| FUEL CAPACITY |
5.5 gal |
20.8 L |
| COOLING SYSTEM FLUID CAPACITY |
0.83 gal |
3.1 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
8.9 gal |
33.5 L |
| ENGINE OIL CAPACITY |
0.75 gal |
2.8 L |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
40 amps |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
2844 psi |
19608.7 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
8.7 gal/min |
32.8 L/min |
| SWING SPEED |
9 rpm |
| SHOE SIZE |
9 in |
228.6 mm |
| NUMBER OF CARRIER ROLLERS PER SIDE |
|
| NUMBER OF TRACK ROLLERS PER SIDE |
3 |
| GROUND PRESSURE |
3.9 psi |
26.9 kPa |
| MAX TRAVEL SPEED |
2.9 mph |
4.7 km/h |
| SHIPPING LENGTH OF UNIT |
12.4 ft in |
3785.6 mm |
| MAX DIGGING DEPTH |
7.8 ft in |
2386.6 mm |
| MAX REACH ALONG GROUND |
12.8 ft in |
3886.2 mm |
| MAX LOADING HEIGHT |
9.3 ft in |
2843.8 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
6.3 ft in |
1905 mm |
| HEIGHT TO TOP OF CAB |
7.5 ft in |
2286 mm |
| GROUND CLEARANCE |
0.68 ft in |
205.7 mm |
| COUNTERWEIGHT CLEARANCE |
ft in |
mm |
| TAIL SWING RADIUS |
3.7 ft in |
1127.8 mm |
| LENGTH OF TRACK ON GROUND |
3.1 ft in |
944.9 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Mini+Excavator&make=Takeuchi&model=TB016&modelid=92809#ixzz3K5zA3T9X
Don't let the small size of this machine fool you. This little guy packs a punch and can fit to reach small places on the job site. The john Deere 17zts allows for increased maneuverability that will speed up the smallest job out there. The only thing that could make this machine any better is adding a Mechanical Thumb or Hydraulic Thumb.
A thumb will add increase usability that will save you both time and money on site. With this added ability you be more flexible and capable of moving and operating with more control.We suggest an 18" or 21" Thumb based of the operating weight of 3814b.
Our Mini Excavator Thumb prices
-
18" Mechanical - $440 + FREE Shipping
- 18" Fully Hydraulic - $720 + FREE Shipping
-
21" Mechanical - $455 + FREE Shipping
- 21" Fully Hydraulic - $735 + FREE Shipping
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
12 ft in |
3657.6 mm |
| C. SHIPPING HEIGHT OF UNIT |
7.6 ft in |
2320 mm |
| I. MAX CUTTING HEIGHT |
11.6 ft in |
3529.6 mm |
| J. MAX LOADING HEIGHT |
8.3 ft in |
2539 mm |
| K. MAX REACH ALONG GROUND |
12.9 ft in |
3938 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
ft in |
mm |
| M. MAX DIGGING DEPTH |
7.3 ft in |
2209.8 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
4.4 ft in |
1347.2 mm |
| D. LENGTH OF TRACK ON GROUND |
4 ft in |
1210 mm |
| E. GROUND CLEARANCE |
0.79 ft in |
240 mm |
| G. HEIGHT TO TOP OF CAB |
7.6 ft in |
2310.4 mm |
| H. TAIL SWING RADIUS |
2.3 ft in |
685.8 mm |
| O. COUNTERWEIGHT CLEARANCE |
1.5 ft in |
457.2 mm |
| F. TRACK GAUGE |
ft in |
mm |
| N. SHOE SIZE |
9.1 in |
230 mm |
Specification
| MAKE |
Isuzu |
| MODEL |
3YB1 |
| NET POWER |
12.3 hp |
9.2 kw |
| POWER MEASURED @ |
2300 rpm |
| DISPLACEMENT |
46.4 cu in |
0.76 L |
| OPERATING WEIGHT |
3814 lb |
1730 kg |
| FUEL CAPACITY |
6.6 gal |
25 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
7.4 gal |
28 L |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
35 amps |
| HYDRAULIC PUMP FLOW CAPACITY |
7.7 gal/min |
29.1 L/min |
| SWING SPEED |
8.6 rpm |
| SHOE SIZE |
9.1 in |
230 mm |
| GROUND PRESSURE |
4.3 psi |
29.9 kPa |
| MAX TRAVEL SPEED |
2.5 mph |
4 km/h |
| TRACK GAUGE |
ft in |
mm |
| REFERENCE BUCKET CAPACITY |
0.05 yd3 |
0.04 m3 |
| MINIMUM BUCKET CAPACITY |
0.02 yd3 |
0.02 m3 |
| MAXIMUM BUCKET CAPACITY |
0.08 yd3 |
0.06 m3 |
| BOOM/STICK OPTION (HEX) 1 |
Arm length 3ft.1in. (930mm) |
| SHIPPING HEIGHT OF UNIT |
7.6 ft in |
2320 mm |
| SHIPPING LENGTH OF UNIT |
12 ft in |
3657.6 mm |
| MAX DIGGING DEPTH |
7.3 ft in |
2209.8 mm |
| MAX REACH ALONG GROUND |
12.9 ft in |
3938 mm |
| MAX CUTTING HEIGHT |
11.6 ft in |
3529.6 mm |
| MAX LOADING HEIGHT |
8.3 ft in |
2539 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
ft in |
mm |
| WIDTH TO OUTSIDE OF TRACKS |
4.4 ft in |
1347.2 mm |
| HEIGHT TO TOP OF CAB |
7.6 ft in |
2310.4 mm |
| GROUND CLEARANCE |
0.79 ft in |
240 mm |
| COUNTERWEIGHT CLEARANCE |
1.5 ft in |
457.2 mm |
| TAIL SWING RADIUS |
2.3 ft in |
685.8 mm |
| LENGTH OF TRACK ON GROUND |
4 ft in |
1210 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Mini+Excavator&make=John+Deere&model=17ZTS&modelid=92316#ixzz3Jzyf0hXP
photo found on http://www.ritchiespecs.com/specification?type=&category=Mini+Excavator&make=John+Deere&model=17ZTS&modelid=92316
There is a lot of upcoming working in Connecticut according to cmdgroup.com. With all this potential work it is now more important than ever to get the job done right.
Construction firms are hiring again! According to a press release from the Associated General Contractors of America 
According to 
If there is one thing that happens often in New Jersey it is construction and hard work. But if we can find a way to make that hard work a easier and save some money at the same time its a win win. 
