So you own a Kubota KX 91...
Congratulations, this was a great purchase on your part. After reading many through reviews and searching the internet to find info on this particular machine it seems that no one has really anything negative to say about them. The closest thing I found was that it didn't have enough counter weight but thats easily fixed.
The is one down side to all excavators while they give you the arm strength of ten men. All that strength with no grip can really end up costing you time in the speed of the project as well as damaging material due to stability or lack there of when trying to pick something up with the bucket alone. We all know what it's like to not have the right tool for the job.
There is a solution to this problem. Buy a thumb attachment for the machine. Adding a thumb to your machine will add value in time and to your bottom line. The speed and scope of any project will greatly increase. Not to mention the amount of money you'll be saving in labor and material.
We suggest :
- 24" Mechanical or Fully Hydraulic thumb ( depending on your needs) or
- 27" Mechanical to Fully hydraulic thumb
Both can be found on our site at up to 40% off the MSRP. We have built a reputation on delivering a great product at a great value to our customers. If you need a quote for your machine just give us a call or measure it for the most accurate size by following this link. Measuring instructions for a Kubota thumb attachment.
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
15.6 ft in |
4759.9 mm |
| C. SHIPPING HEIGHT OF UNIT |
8 ft in |
2440.9 mm |
| I. MAX CUTTING HEIGHT |
16.3 ft in |
4953 mm |
| J. MAX LOADING HEIGHT |
11.6 ft in |
3530.6 mm |
| K. MAX REACH ALONG GROUND |
16.8 ft in |
5130.8 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
7.8 ft in |
2387.5 mm |
| M. MAX DIGGING DEPTH |
10.4 ft in |
3175 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
5.1 ft in |
1549.4 mm |
| E. GROUND CLEARANCE |
0.97 ft in |
294.6 mm |
| G. HEIGHT TO TOP OF CAB |
ft in |
mm |
Specification
| MAKE |
Kubota |
| MODEL |
D1503 |
| NET POWER |
28 hp |
20.9 kw |
| POWER MEASURED @ |
2300 rpm |
| DISPLACEMENT |
91.5 cu in |
1.5 L |
| OPERATING WEIGHT |
7110 lb |
3225 kg |
| FUEL CAPACITY |
11.9 gal |
45 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
9.5 gal |
36 L |
| HYDRAULIC PUMP FLOW CAPACITY |
27.3 gal/min |
103.3 L/min |
| SWING SPEED |
9.4 rpm |
| GROUND PRESSURE |
4.5 psi |
31 kPa |
| MAX TRAVEL SPEED |
2.9 mph |
4.7 km/h |
| DRAWBAR PULL |
8363 lb |
kN |
| SHIPPING HEIGHT OF UNIT |
8 ft in |
2440.9 mm |
| SHIPPING LENGTH OF UNIT |
15.6 ft in |
4759.9 mm |
| MAX DIGGING DEPTH |
10.4 ft in |
3175 mm |
| MAX REACH ALONG GROUND |
16.8 ft in |
5130.8 mm |
| MAX CUTTING HEIGHT |
16.3 ft in |
4953 mm |
| MAX LOADING HEIGHT |
11.6 ft in |
3530.6 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
7.8 ft in |
2387.5 mm |
| WIDTH TO OUTSIDE OF TRACKS |
5.1 ft in |
1549.4 mm |
| HEIGHT TO TOP OF CAB |
ft in |
mm |
| GROUND CLEARANCE |
0.97 ft in |
294.6 mm |
This compact crawler excavator is great for ground leveling and backfilling. It offers an offset boom with built in swing that provides awesome visibility but also multi- width excavation and parallel to wall operation. If your looking to add some extra value to your TC29 we suggest you add a fully hydraulic thumb attachment.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
Recommended: Size based on operating weight
We suggest a
24" Basic Hydraulic
24" Fully Hydraulic
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| I. MAX CUTTING HEIGHT |
13.4 ft in |
4070 mm |
| J. MAX LOADING HEIGHT |
9.3 ft in |
2840 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
4.9 ft in |
1500 mm |
| M. MAX DIGGING DEPTH |
9.1 ft in |
2760 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
4.6 ft in |
1400 mm |
| E. GROUND CLEARANCE |
0.89 ft in |
270 mm |
| G. HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| H. TAIL SWING RADIUS |
4.3 ft in |
1300 mm |
| F. TRACK GAUGE |
3.6 ft in |
1100 mm |
| N. SHOE SIZE |
11.8 in |
300 mm |
Specification
| MAKE |
Mitsubishi |
| MODEL |
S 4L |
| NET POWER |
28 hp |
20.9 kw |
| POWER MEASURED @ |
2200 rpm |
| DISPLACEMENT |
91 cu in |
1.5 L |
| NUMBER OF CYLINDERS |
4 |
| OPERATING WEIGHT |
6480 lb |
2939.3 kg |
| FUEL CAPACITY |
13.7 gal |
52 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
22.5 gal |
85 L |
| OPERATING VOLTAGE |
12 V |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
3050 psi |
21029 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
26.2 gal/min |
99 L/min |
| SWING SPEED |
10 rpm |
| SHOE SIZE |
11.8 in |
300 mm |
| GROUND PRESSURE |
3.9 psi |
26.9 kPa |
| MAX TRAVEL SPEED |
2.9 mph |
4.6 km/h |
| DRAWBAR PULL |
6300 lb |
28 kN |
| TRACK GAUGE |
3.6 ft in |
1100 mm |
| REFERENCE BUCKET CAPACITY |
0.09 yd3 |
0.07 m3 |
| MINIMUM BUCKET CAPACITY |
0.05 yd3 |
0.04 m3 |
| MAXIMUM BUCKET CAPACITY |
0.14 yd3 |
0.11 m3 |
| BOOM/STICK OPTION (HEX) 1 |
boom w/ dipperstick 53'' (1350mm) |
| MAX DIGGING DEPTH |
9.1 ft in |
2760 mm |
| MAX CUTTING HEIGHT |
13.4 ft in |
4070 mm |
| MAX LOADING HEIGHT |
9.3 ft in |
2840 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
4.9 ft in |
1500 mm |
| BOOM/STICK OPTION (HEX) 2 |
boom w/ dipperstick 61'' (1550mm) |
| MAX DIGGING DEPTH |
9.7 ft in |
2960 mm |
| MAX CUTTING HEIGHT |
13.7 ft in |
4190 mm |
| MAX LOADING HEIGHT |
9.7 ft in |
2960 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
5.1 ft in |
1550 mm |
| WIDTH TO OUTSIDE OF TRACKS |
4.6 ft in |
1400 mm |
| HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| GROUND CLEARANCE |
0.89 ft in |
270 mm |
| TAIL SWING RADIUS |
4.3 ft in |
1300 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Mini+Excavator&make=Terex&model=TC29&modelid=92651#ixzz3JR1tDrtT
To get the most accurate size for your machine we always suggest you measure the machine. This will only take 5 minutes.
For measuring instructions click this link. Measuring instructions
Our suggested sizes are based off of the Yanmar Vio-55 operating weight of 11576 lbs.
We suggest a :
-30 " Mechanical
-30" Basic Hydraulic
-30" Fully Hydraulic
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
18.2 ft in |
5560 mm |
| C. SHIPPING HEIGHT OF UNIT |
8.6 ft in |
2620 mm |
| I. MAX CUTTING HEIGHT |
21.1 ft in |
6440 mm |
| J. MAX LOADING HEIGHT |
14.4 ft in |
4400 mm |
| K. MAX REACH ALONG GROUND |
20.3 ft in |
6200 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
9.5 ft in |
2900 mm |
| M. MAX DIGGING DEPTH |
13.1 ft in |
3980 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
6.5 ft in |
1990 mm |
| E. GROUND CLEARANCE |
1.2 ft in |
360 mm |
| G. HEIGHT TO TOP OF CAB |
8.6 ft in |
2620 mm |
| H. TAIL SWING RADIUS |
3.3 ft in |
995 mm |
| N. SHOE SIZE |
15.7 in |
400 mm |
Specification
| MAKE |
Yanmar |
| MODEL |
4TNV88-PBV |
| GROSS POWER |
38.7 hp |
28.9 kw |
| POWER MEASURED @ |
2400 rpm |
| OPERATING WEIGHT |
11576 lb |
5250.8 kg |
| FUEL CAPACITY |
16.9 gal |
64 L |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
3553 psi |
24497.1 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
35 gal/min |
132.5 L/min |
| SWING SPEED |
10 rpm |
| SHOE SIZE |
15.7 in |
400 mm |
| GROUND PRESSURE |
4.1 psi |
28.4 kPa |
| MAX TRAVEL SPEED |
2.7 mph |
4.3 km/h |
| BOOM/STICK OPTION (HEX) 1 |
Standard |
| SHIPPING HEIGHT OF UNIT |
8.6 ft in |
2620 mm |
| SHIPPING LENGTH OF UNIT |
18.2 ft in |
5560 mm |
| MAX DIGGING DEPTH |
13.1 ft in |
3980 mm |
| MAX REACH ALONG GROUND |
20.3 ft in |
6200 mm |
| MAX CUTTING HEIGHT |
21.1 ft in |
6440 mm |
| MAX LOADING HEIGHT |
14.4 ft in |
4400 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
9.5 ft in |
2900 mm |
| WIDTH TO OUTSIDE OF TRACKS |
6.5 ft in |
1990 mm |
| HEIGHT TO TOP OF CAB |
8.6 ft in |
2620 mm |
| GROUND CLEARANCE |
1.2 ft in |
360 mm |
| TAIL SWING RADIUS |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Midi+Excavator&make=Yanmar&model=Vio55-5&modelid=105988#ixzz3Ixx2hBdz
Bobcat has always made a great machine. But if you want to unlock the full potential of the Bobcat 334G you need to add a thumb attachment for extra operating control and ease of use. A thumb could be the difference between a 30min job and an hour long job.
These thumbs are made from the same quality and are the heavy duty alternative to the "kits" you'll find.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Measuring Instructions
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
Recommended: Size based on operating weight of 7568.5 lb
We suggest a
27" Mechanical - $450 FREE Shipping
27" Basic Hydraulic - $635 + FREE Shipping
27" Fully Hydraulic - $685 + FREE Shipping
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
16 ft in |
4889 mm |
| C. SHIPPING HEIGHT OF UNIT |
7.7 ft in |
2358 mm |
| I. MAX CUTTING HEIGHT |
15.4 ft in |
4708 mm |
| J. MAX LOADING HEIGHT |
10.7 ft in |
3270 mm |
| K. MAX REACH ALONG GROUND |
17 ft in |
5167 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
8.3 ft in |
2533 mm |
| M. MAX DIGGING DEPTH |
11.2 ft in |
3403 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
5.1 ft in |
1540 mm |
| D. LENGTH OF TRACK ON GROUND |
5.1 ft in |
1562 mm |
| G. HEIGHT TO TOP OF CAB |
7.7 ft in |
2358 mm |
| H. TAIL SWING RADIUS |
4.6 ft in |
1390 mm |
| O. COUNTERWEIGHT CLEARANCE |
1.8 ft in |
551 mm |
| F. TRACK GAUGE |
4 ft in |
1220 mm |
| N. SHOE SIZE |
12.6 in |
320 mm |
Specification
| MAKE |
Kubota |
| MODEL |
V-2203-M-DI-E2B |
| GROSS POWER |
40.1 hp |
29.9 kw |
| POWER MEASURED @ |
2400 rpm |
| DISPLACEMENT |
134.3 cu in |
2.2 L |
| OPERATING WEIGHT |
7568.5 lb |
3433 kg |
| FUEL CAPACITY |
15.3 gal |
57.9 L |
| HYDRAULIC PUMP FLOW CAPACITY |
24 gal/min |
90.9 L/min |
| SWING SPEED |
9.2 rpm |
| SHOE SIZE |
12.6 in |
320 mm |
| GROUND PRESSURE |
4.5 psi |
30.8 kPa |
| MAX TRAVEL SPEED |
3.5 mph |
5.6 km/h |
| TRACK GAUGE |
4 ft in |
1220 mm |
| BOOM/STICK OPTION (HEX) 1 |
Stick 1500mm |
| SHIPPING HEIGHT OF UNIT |
7.7 ft in |
2358 mm |
| SHIPPING LENGTH OF UNIT |
16 ft in |
4889 mm |
| MAX DIGGING DEPTH |
11.2 ft in |
3403 mm |
| MAX REACH ALONG GROUND |
17 ft in |
5167 mm |
| MAX CUTTING HEIGHT |
15.4 ft in |
4708 mm |
| MAX LOADING HEIGHT |
10.7 ft in |
3270 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
8.3 ft in |
2533 mm |
| WIDTH TO OUTSIDE OF TRACKS |
5.1 ft in |
1540 mm |
| HEIGHT TO TOP OF CAB |
7.7 ft in |
2358 mm |
| COUNTERWEIGHT CLEARANCE |
1.8 ft in |
551 mm |
| TAIL SWING RADIUS |
4.6 ft in |
1390 mm |
| LENGTH OF TRACK ON GROUND |
5.1 ft in |
1562 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Mini+Excavator&make=Bobcat&model=334&modelid=92961#ixzz3I732zsHd
The Gehl 383Z is a great compact excavator. Pair this excavator with our 27" Thumb Attachment and you will have a combination that will make any job fast and easy. Saving you a lot of time and money which we all know is one of the most important things a contractor can do.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine. For a digram follow this link to our site. >
Measuring Instructions.Follow this link for specs pictures and descriptions. Click here -->
Pictures of Thumbs
Recommended: Size based on operating weight
We suggest a
-
27" Mechanical - $450. - $25 Discount = $425 + FREE Shipping
-
27" Basic Hydraulic - $635 - $25 Discount = $610 + FREE Shipping
-
27" Fully Hydraulic - $685 - $25 Discount = $660 + FREE Shipping
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
15.7 ft in |
4800 mm |
| I. MAX CUTTING HEIGHT |
15.3 ft in |
4660 mm |
| J. MAX LOADING HEIGHT |
11 ft in |
3350 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
8.8 ft in |
2670 mm |
| M. MAX DIGGING DEPTH |
11 ft in |
3360 mm |
| D. LENGTH OF TRACK ON GROUND |
5.6 ft in |
1702 mm |
| E. GROUND CLEARANCE |
0.92 ft in |
280 mm |
| G. HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| H. TAIL SWING RADIUS |
2.9 ft in |
870 mm |
| N. SHOE SIZE |
11.8 in |
300 mm |
Specification
| MAKE |
EP |
| MODEL |
Yanmar 3TNV88-PNS, A TIER II |
| NET POWER |
28.8 hp |
21.5 kw |
| POWER MEASURED @ |
2400 rpm |
| DISPLACEMENT |
100 cu in |
1.6 L |
| OPERATING WEIGHT |
8002 lb |
3629.6 kg |
| FUEL CAPACITY |
11.6 gal |
44 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
11.9 gal |
45 L |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
71 amps |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
3481 psi |
24000.6 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
31.2 gal/min |
118.1 L/min |
| SWING SPEED |
8.8 rpm |
| SHOE SIZE |
11.8 in |
300 mm |
| NUMBER OF CARRIER ROLLERS PER SIDE |
1 |
| NUMBER OF TRACK ROLLERS PER SIDE |
4 |
| GROUND PRESSURE |
4.8 psi |
33.1 kPa |
| MAX TRAVEL SPEED |
2.9 mph |
4.6 km/h |
| DRAWBAR PULL |
6614 lb |
3000 kN |
| BOOM/STICK OPTION (HEX) 1 |
Stick 5'5" (1650mm) |
| SHIPPING LENGTH OF UNIT |
15.7 ft in |
4800 mm |
| MAX DIGGING DEPTH |
11 ft in |
3360 mm |
| MAX CUTTING HEIGHT |
15.3 ft in |
4660 mm |
| MAX LOADING HEIGHT |
11 ft in |
3350 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
8.8 ft in |
2670 mm |
| HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| GROUND CLEARANCE |
0.92 ft in |
280 mm |
| TAIL SWING RADIUS |
2.9 ft in |
870 mm |
| LENGTH OF TRACK ON GROUND |
5.6 ft in |
1702 mm |
Photos found on Ritchiespecs.com
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Mini+Excavator&make=Gehl&model=383Z&modelid=92696#ixzz3HpfILDwV
We recently received a request for a quote on a Kubato L2800 Backhoe. In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
We offer three types of thumbs at this time, a Mechanical Thumb, a Basic Hydraulic Thumb and A Fully Hydraulic Thumb. While our Fully hydraulic Thumb is our most popular for the price keep in mind not all machines are set up for hydraulic thumbs. Please check your machine.
Measuring Instructions
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
Recommended: Size based on operating weight
We suggest a
-18" Mechanical - $375. + FREE Shipping
-18" Basic Hydraulic - $585 + FREE Shipping
-18" Fully Hydraulic - $635 + FREE Shipping
or
-21" Mechanical - $390 + FREE Shipping
-21" Basic Hydraulic - $600+ FREE Shipping
-21" Fully Hydraulic - $650 + FREE Shipping
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| A. OVERALL LENGTH |
8.9 ft in |
2705 mm |
| B. WIDTH OUTSIDE FRAME |
4.3 ft in |
1305 mm |
| C. HEIGHT TO TOP OF CAB |
7.1 ft in |
2160 mm |
| D. WHEELBASE |
5.3 ft in |
1610 mm |
| E. GROUND CLEARANCE |
13.4 in |
340 mm |
Specification
| MAKE |
Kubota |
| MODEL |
L2800 Gear |
| NET POWER |
hp |
kw |
| GROSS POWER |
29 hp |
21.6 kw |
| PTO POWER |
24 hp |
17.9 kw |
| POWER MEASURED @ |
2800 rpm |
| DISPLACEMENT |
85 cu in |
1.4 L |
| NUMBER OF CYLINDERS |
3 |
| ASPIRATION |
E-TVCS indirect injection |
| OPERATING WEIGHT |
2535.3 lb |
1150 kg |
| FUEL CAPACITY |
9 gal |
34 L |
| 3 POINT HITCH TYPE |
Cat. I |
| 3 POINT HITCH LIFT CAPACITY @ 24 INCHES |
1435.2 lb |
651 kg |
| TURNING RADIUS |
8.2 ft in |
2500 mm |
| OPERATING VOLTAGE |
12 V |
| TYPE |
sliding gear constant mesh |
| NUMBER OF FORWARD GEARS |
8 |
| NUMBER OF REVERSE GEARS |
4 |
| MAX SPEED |
13.7 mph |
22 km/h |
| PUMP FLOW CAPACITY |
6.5 gal/min |
24.7 L/min |
| OVERALL LENGTH |
8.9 ft in |
2705 mm |
| HEIGHT TO TOP OF CAB |
7.1 ft in |
2160 mm |
| WHEELBASE |
5.3 ft in |
1610 mm |
| GROUND CLEARANCE |
13.4 in |
340 mm |
| TIRE SIZE |
front 7-16 rear 11.2-24 |
| WIDTH OUTSIDE FRAME |
4.3 ft in |
1305 mm |
Recommended: Size based on operating weight
We suggest a
36" Mechanical - $670 FREE Shipping
36" Fully Hydraulic - $825 + FREE Shipping
To get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| J. LOAD HEIGHT - STD |
11.2 ft in |
3400 mm |
| K. REACH FROM SWIVEL - STD |
18.1 ft in |
5510 mm |
| L. DIG DEPTH - STD |
14.4 ft in |
4390 mm |
| M. REACH AT LOAD HEIGHT - STD |
8.8 ft in |
2670 mm |
| A. TRANSPORT LENGTH |
22.8 ft in |
6950 mm |
| B. TRANSPORT WIDTH |
7.2 ft in |
2180 mm |
| C. TRANSPORT HEIGHT |
13.9 ft in |
4250 mm |
| D. WHEELBASE |
7 ft in |
2150 mm |
| E. GROUND CLEARANCE |
1.2 ft in |
371 mm |
| F. HEIGHT TO TOP OF CAB |
8.8 ft in |
2690 mm |
| G. CLEARANCE AT MAX DUMP HEIGHT |
8.8 ft in |
2690 mm |
| H. REACH AT MAX DUMP HEIGHT |
2.5 ft in |
763 mm |
| I. DIG DEPTH |
5.9 in |
149 mm |
Specification
| MAKE |
Case |
| MODEL |
Family III 445T/M2, Tier II certified |
| NET POWER |
90 hp |
67 kw |
| GROSS POWER |
95 hp |
71 kw |
| DISPLACEMENT |
272 cu in |
4.5 L |
| POWER MEASURED @ |
2200 rpm |
| TORQUE MEASURED @ |
1500 rpm |
| NUMBER OF CYLINDERS |
4 |
| NET TORQUE RISE |
29 % |
| NET MAX TORQUE |
289 lb ft |
392 Nm |
| ASPIRATION |
turbocharged |
| OPERATING WEIGHT 2WD |
14285 lb |
6480 kg |
| MAX WEIGHT |
17545 lb |
7958 kg |
| FUEL CAPACITY |
31.4 gal |
119 L |
| HYDRAULIC SYSTEM FLUID CAPACITY |
31.5 gal |
119 L |
| OIL SYSTEM FLUID CAPACITY |
3.6 gal |
13.6 L |
| COOLING SYSTEM FLUID CAPACITY |
4.8 gal |
18 L |
| TRANSMISSION FLUID CAPACITY |
5.5 gal |
20.8 L |
| FRONT AXLE FLUID CAPACITY |
1.5 gal |
5.5 L |
| REAR AXLE FLUID CAPACITY |
3.8 gal |
14.2 L |
| TURNING RADIUS |
11 ft in |
3350 mm |
| TIRE SIZE FRONT - 2WD / 4WD |
11Lx16.1/12x16.5 |
| REAR TIRES SIZE 2WD/4WD |
17.5Lx24/19.5x24 |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
90 amps |
| TYPE |
4-speed synchromesh with hydraulically actuated clutches |
| NUMBER OF FORWARD GEARS |
4 |
| NUMBER OF REVERSE GEARS |
4 |
| MAX SPEED - FORWARD |
25.5 mph |
41 km/h |
| MAX SPEED REVERSE |
30.8 mph |
49.6 km/h |
| DIG DEPTH - STD |
14.4 ft in |
4390 mm |
| DIG DEPTH - EXT |
18.3 ft in |
5560 mm |
| REACH FROM SWIVEL - STD |
18.1 ft in |
5510 mm |
| REACH FROM SWIVEL - EXT |
21.8 ft in |
6650 mm |
| BUCKET DIG FORCE - STD |
12821 lb |
0 kg |
| BUCKET DIG FORCE - EXT |
12821 lb |
0 kg |
| LOAD AT MAX LIFT - STD |
2750 lb |
1247 kg |
| LOAD AT MAX LIFT - EXT |
1350 lb |
612 kg |
| LOAD HEIGHT - STD |
11.2 ft in |
3400 mm |
| LOAD HEIGHT - EXT |
13.3 ft in |
4040 mm |
| REACH AT LOAD HEIGHT - STD |
8.8 ft in |
2670 mm |
| REACH AT LOAD HEIGHT - EXT |
11.5 ft in |
3500 mm |
| BUCKET CAPACITY |
0.87 yd3 |
0.67 m3 |
| BUCKET WIDTH |
82 in |
2080 mm |
| BUCKET BREAKOUT FORCE |
9164 lb |
40.8 kN |
| LIFT CAPACITY AT FULL HEIGHT |
6182 lb |
2804 kg |
| CLEARANCE AT MAX DUMP HEIGHT |
8.8 ft in |
2690 mm |
| REACH AT MAX DUMP HEIGHT |
2.5 ft in |
763 mm |
| DIG DEPTH |
5.9 in |
149 mm |
| PUMP TYPE |
gear-type, transmission driven |
| PUMP FLOW CAPACITY |
28.5 gal/min |
108 L/min |
| RELIEF VALVE PRESSURE |
3050 psi |
0 kPa |
| TRANSPORT LENGTH |
22.8 ft in |
6950 mm |
| TRANSPORT WIDTH |
7.2 ft in |
2180 mm |
| TRANSPORT HEIGHT |
13.9 ft in |
4250 mm |
| HEIGHT TO TOP OF CAB |
8.8 ft in |
2690 mm |
| WHEELBASE |
7 ft in |
2150 mm |
| GROUND CLEARANCE |
1.2 ft in |
Recommended Backhoe Thumb Sizes are based on operating weight for a John Deere 410B Loader Backhoe.
We suggest a
36" Mechanical Thumb Attachment- $645. - $25 Discount = $620 + FREE Shipping
36" Fully Hydraulic Thumb Attachment - $785 - $25 Discount = $760 + FREE Shipping
I n order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine. For a digram follow this link to our site. >
Measuring InstructionsIf you measure your machine and need something larger please email us with the length for a quote.
Check out the pecs and dimensions of your
John Deere 410B Loader Backhoe
Selected Dimensions
| J. LOAD HEIGHT - STD |
11.8 ft in |
3590 mm |
| K. REACH FROM SWIVEL - STD |
17.6 ft in |
5360 mm |
| L. DIG DEPTH - STD |
14.5 ft in |
4420 mm |
| M. REACH AT LOAD HEIGHT - STD |
21.4 ft in |
6530 mm |
| A. TRANSPORT LENGTH |
23 ft in |
7010 mm |
| B. TRANSPORT WIDTH |
7.7 ft in |
2340 mm |
| C. TRANSPORT HEIGHT |
11.4 ft in |
3480 mm |
| D. WHEELBASE |
6.9 ft in |
2100 mm |
| E. GROUND CLEARANCE |
1 ft in |
305 mm |
| G. CLEARANCE AT MAX DUMP HEIGHT |
9 ft in |
2740 mm |
| H. REACH AT MAX DUMP HEIGHT |
2.3 ft in |
710 mm |
| I. DIG DEPTH |
4 in |
100 mm |
Specification
| MAKE |
John Deere |
| MODEL |
4-219D |
| GROSS POWER |
66 hp |
49.2 kw |
| NET POWER |
62 hp |
46.2 kw |
| DISPLACEMENT |
219 cu in |
3.6 L |
| POWER MEASURED @ |
2500 rpm |
| TORQUE MEASURED @ |
1300 rpm |
| NUMBER OF CYLINDERS |
4 |
| NET TORQUE RISE |
20 % |
| NET MAX TORQUE |
156 lb ft |
211.5 Nm |
| ASPIRATION |
Naturally aspirated |
| MAX WEIGHT |
14400 lb |
6545 kg |
| FUEL CAPACITY |
23 gal |
87 L |
| HYDRAULIC SYSTEM FLUID CAPACITY |
19 gal |
72 L |
| OIL SYSTEM FLUID CAPACITY |
2.3 gal |
8.5 L |
| COOLING SYSTEM FLUID CAPACITY |
4.2 gal |
16 L |
| TRANSMISSION FLUID CAPACITY |
3.4 gal |
13 L |
| TURNING RADIUS |
10.3 ft in |
3120 mm |
| TIRE SIZE FRONT - 2WD / 4WD |
11L-15,10PR,F3;12.00-16.5,8PR,R4 |
| REAR TIRES SIZE 2WD/4WD |
19.5L-24,10PR,R4 |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
35 amps |
| TYPE |
Manual shift with first and second speeds having sliding collar engagement and third and fourth speeds engaged in cone-type synchronizers. |
| NUMBER OF FORWARD GEARS |
4 |
| NUMBER OF REVERSE GEARS |
4 |
| MAX SPEED - FORWARD |
22.3 mph |
35.9 km/h |
| MAX SPEED REVERSE |
25.9 mph |
41.7 km/h |
| DIG DEPTH - STD |
14.5 ft in |
4420 mm |
| DIG DEPTH - EXT |
18.5 ft in |
5640 mm |
| REACH FROM SWIVEL - STD |
17.6 ft in |
5360 mm |
| REACH FROM SWIVEL - EXT |
21.6 ft in |
6580 mm |
| BUCKET DIG FORCE - STD |
10200 lb |
4625 kg |
| BUCKET DIG FORCE - EXT |
10200 lb |
4625 kg |
| LOAD AT MAX LIFT - STD |
4200 lb |
1920 kg |
| LOAD AT MAX LIFT - EXT |
2440 lb |
1110 kg |
| LOAD HEIGHT - STD |
11.8 ft in |
3590 mm |
| LOAD HEIGHT - EXT |
12.8 ft in |
3910 mm |
| REACH AT LOAD HEIGHT - STD |
21.4 ft in |
6530 mm |
| REACH AT LOAD HEIGHT - EXT |
25.4 ft in |
7750 mm |
| BUCKET CAPACITY |
1.3 yd3 |
1 m3 |
| BUCKET WIDTH |
92 in |
2340 mm |
| BUCKET BREAKOUT FORCE |
7800 lb |
3540 kN |
| LIFT CAPACITY AT FULL HEIGHT |
5300 lb |
2400 kg |
| CLEARANCE AT MAX DUMP HEIGHT |
9 ft in |
2740 mm |
| REACH AT MAX DUMP HEIGHT |
2.3 ft in |
710 mm |
| DIG DEPTH |
4 in |
100 mm |
| PUMP TYPE |
8 radial piston, closed-center, variable flow, constant pressure |
| PUMP FLOW CAPACITY |
30 gal/min |
1.9 L/min |
| RELIEF VALVE PRESSURE |
2500 psi |
17238 kPa |
| TRANSPORT LENGTH |
23 ft in |
7010 mm |
| TRANSPORT WIDTH |
7.7 ft in |
2340 mm |
| TRANSPORT HEIGHT |
11.4 ft in |
3480 mm |
| WHEELBASE |
6.9 ft in |
2100 mm |
| GROUND CLEARANCE |
1 ft in |
305 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Loader+Backhoe&make=John+Deere&model=410B&modelid=91966#ixzz3Ff9YEzLo
Recommended Mini Excavator Thumb Attachment sizes for a Komatsu pc35 Operating Weight and Specs
We are always getting requests for quotes on suggested thumb sizes for mini excavators.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
Recommended: Size based on operating weight
We suggest a
30" Mechanical Mini Excavator Thumb FREE Shipping
30" Basic Hydraulic Mini Excavator Thumb FREE Shipping
30" Fully Hydraulic Mini Excavator Thumb - FREE Shipping
Selected Dimensions
| K. MAX REACH ALONG GROUND |
17.1 ft in |
5225 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
8.9 ft in |
2720 mm |
| M. MAX DIGGING DEPTH |
10.4 ft in |
3170 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
5.8 ft in |
1740 mm |
| D. LENGTH OF TRACK ON GROUND |
15.9 ft in |
4850 mm |
| E. GROUND CLEARANCE |
6.9 ft in |
2105 mm |
| G. HEIGHT TO TOP OF CAB |
8.3 ft in |
2530 mm |
| H. TAIL SWING RADIUS |
3.1 ft in |
950 mm |
| O. COUNTERWEIGHT CLEARANCE |
15.9 ft in |
4850 mm |
Specification
| MAKE |
Komatsu |
| MODEL |
3D88E-5 |
| GROSS POWER |
29.1 hp |
21.7 kw |
| POWER MEASURED @ |
1.6 rpm |
| DISPLACEMENT |
100 cu in |
1.6 L |
| OPERATING WEIGHT |
8245 lb |
3740 kg |
| FUEL CAPACITY |
11.6 gal |
44 L |
| COOLING SYSTEM FLUID CAPACITY |
0.9 gal |
3.3 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
8.7 gal |
33 L |
| ENGINE OIL CAPACITY |
2 gal |
7.7 L |
| OPERATING VOLTAGE |
12 V |
| SWING SPEED |
9 rpm |
| NUMBER OF CARRIER ROLLERS PER SIDE |
1 |
| NUMBER OF TRACK ROLLERS PER SIDE |
4 |
| MAX TRAVEL SPEED |
2.9 mph |
4.6 km/h |
| REFERENCE BUCKET CAPACITY |
0.07 yd3 |
0.05 m3 |
| MINIMUM BUCKET CAPACITY |
0.07 yd3 |
0.05 m3 |
| MAXIMUM BUCKET CAPACITY |
0.17 yd3 |
0.13 m3 |
| MAX DIGGING DEPTH |
10.4 ft in |
3170 mm |
| MAX REACH ALONG GROUND |
17.1 ft in |
5225 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
8.9 ft in |
2720 mm |
| WIDTH TO OUTSIDE OF TRACKS |
5.8 ft in |
1740 mm |
| HEIGHT TO TOP OF CAB |
8.3 ft in |
2530 mm |
| GROUND CLEARANCE |
6.9 ft in |
2105 mm |
| COUNTERWEIGHT CLEARANCE |
15.9 ft in |
4850 mm |
| TAIL SWING RADIUS |
3.1 ft in |
950 mm |
| LENGTH OF TRACK ON GROUND |
15.9 ft in |
4850 mm |
This info was provided by:
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=construction+equipment&category=Mini+Excavator&make=Komatsu&model=PC35MR-2&modelid=92256#ixzz3DfyI8UdJ
We see a lot of people out there are curious about building there own thumb attachments. Our own customers tell us that before they found us they were considering buying a kit and building one themselves.
The honest truth is that building your own mini excavator thumb just isn't worth the time and hassle. Why build one when we sell them for a fraction of what you can build them for? In order to build your own mini excavator thumb you would need bulk purchasing power and would be left with extra material.Lets not forget about the specialized tools along with welding ability.
So If you are considering building your own thumb ask yourself a few questions first.
-
Would it be cheaper to build a excavator thumb myself ? Often times it would actually cost your more in time and money, especially when MiniExcavatorthumbs.com sells weld on excavator and backhoe thumb attachments at 40 percent lower than retail.
-
Do I have the tools and material? The tools we use to build mini excavator thumbs are very expensive and we hire highly paid professionals to put these things together. This ensures you are getting a quality product that will last over time.
-
If I purchased a kit how long would it take to build? Your time is valuable and you would rather be spending your hours after a long hard day at work relaxing rather than messing around trying to build a thumb. Our thumbs typically arrive within 5 -7 business days.
So the choice is clear. There is no need to try and build a mini excavator thumb attachment when you can buy one brand new for half the cost, saving you both time and money.
Cheers,
Mr. Mini Excavator Thumbs
