The Takeuchi TB125 Compact Excavator is the class leading standard for its digging performance. It offers any operator, new or experienced a nice amount of comfort an control. While the tilt-up platform offers superior accessibility for servicing the machine quick and easy. If your in the market for a compact excavator then you'll definitely want to give this a look.
The TB125 Mini Excavator Features Include:
- Short pitch rubber tracks for reduced vibration during travel
- Adjustable suspension seat allows for plenty of leg room and easy visibility
- Automatic fuel bleed system eliminates down time and service calls
- Electro hydraulic push buttons for control of the aux hydraulic circuit
While all these features are sure to improve performance, the single best feature an operator can have is still a thumb attachment. Think about it... you wouldn't be able to pick up anything without your thumb. A machine is no different, the benefits of adding a thumb are limitless.
Benefits of adding a thumb attachment to you TB125:
- Increase the value of your excavator
- Improved performance and material handling
- Load stability and security
- Decrease the amount of damage to materials
The suggested Mini Excavator Thumb Size for your Takeuchi:
- 24" Thumb Attachment - based on 6,165lb. operating weight
At MiniExcavatorThumbs.com we deliver quality excavator attachments at factory direct prices up 45% off MSRP everyday. We literally move mountains for our customers so they can move mountains for there customers. Our thumbs are made in America with USA high grade steel to insure they perform time after time. Order a thumb today and receive it with in 5-7 business days.
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
14.8 ft in |
4520.2 mm |
| J. MAX LOADING HEIGHT |
10.4 ft in |
3176 mm |
| K. MAX REACH ALONG GROUND |
15.5 ft in |
4724.4 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
7.4 ft in |
2261.6 mm |
| M. MAX DIGGING DEPTH |
9.5 ft in |
2895.6 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
4.8 ft in |
1447.8 mm |
| D. LENGTH OF TRACK ON GROUND |
4.9 ft in |
1493.5 mm |
| E. GROUND CLEARANCE |
0.98 ft in |
299.7 mm |
| G. HEIGHT TO TOP OF CAB |
8 ft in |
2438.4 mm |
| H. TAIL SWING RADIUS |
4.3 ft in |
1295.4 mm |
| O. COUNTERWEIGHT CLEARANCE |
1 ft in |
304.8 mm |
| F. TRACK GAUGE |
ft in |
mm |
| N. SHOE SIZE |
12 in |
304.8 mm |
Specification
| MAKE |
Yanmar |
| MODEL |
3TNV82-QTB1 |
| GROSS POWER |
22.5 hp |
16.8 kw |
| POWER MEASURED @ |
2300 rpm |
| DISPLACEMENT |
81.2 cu in |
1.3 L |
| TORQUE MEASURED @ |
1500 rpm |
| MAX TORQUE |
62 lb ft |
84.1 Nm |
| NUMBER OF CYLINDERS |
3 |
| OPERATING WEIGHT |
6165 lb |
2796.4 kg |
| FUEL CAPACITY |
13.4 gal |
50.7 L |
| COOLING SYSTEM FLUID CAPACITY |
0.97 gal |
3.7 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
19.6 gal |
74.2 L |
| ENGINE OIL CAPACITY |
0.95 gal |
3.6 L |
| OPERATING VOLTAGE |
12 V |
| ALTERNATOR SUPPLIED AMPERAGE |
40 amps |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
2987 psi |
20594.6 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
15.4 gal/min |
58.3 L/min |
| SWING SPEED |
9.6 rpm |
| SHOE SIZE |
12 in |
304.8 mm |
| NUMBER OF CARRIER ROLLERS PER SIDE |
1 |
| NUMBER OF TRACK ROLLERS PER SIDE |
3 |
| GROUND PRESSURE |
4.1 psi |
28.3 kPa |
| MAX TRAVEL SPEED |
3 mph |
4.8 km/h |
| TRACK GAUGE |
ft in |
mm |
| SHIPPING LENGTH OF UNIT |
14.8 ft in |
4520.2 mm |
| MAX DIGGING DEPTH |
9.5 ft in |
2895.6 mm |
| MAX REACH ALONG GROUND |
15.5 ft in |
4724.4 mm |
| MAX LOADING HEIGHT |
10.4 ft in |
3176 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
7.4 ft in |
2261.6 mm |
| WIDTH TO OUTSIDE OF TRACKS |
4.8 ft in |
1447.8 mm |
| HEIGHT TO TOP OF CAB |
8 ft in |
2438.4 mm |
| GROUND CLEARANCE |
0.98 ft in |
299.7 mm |
| COUNTERWEIGHT CLEARANCE |
1 ft in |
304.8 mm |
| TAIL SWING RADIUS |
4.3 ft in |
1295.4 mm |
| LENGTH OF TRACK ON GROUND |
4.9 ft in |
1493.5 mm |
One of the nice things about living in a warm climate like Tampa Florida is that the seasonal economic impact experienced in other parts of the country due to weather don't effect us as much. Especially in the construction industry. We get to experience steady year round work that others would kill for.
After reviewing a list of the largest on going construction projects in the Tampa Bay Business Journal, it becomes clear that there is a lot of work going on around the area. I know what your thinking, thats great for the big guys but whats that mean for my small business? Simply put more work. When money is being spent that typically indicates more money in the economy as a whole.They question you should be asking is what can i do to improve my business?
The easy answer is reinvest in new equipment and things that will increase cashflow and productivity. Something as simple as adding a thumb attachment to your excavator or backhoe could help your business more than you think.
You will see an instant return when you purchase a Mini excavator Thumb in the form of increased productivity, added safety on site leading to and the new ability to grab on to any material you can get in your bucket. This ability is invaluable to a lot of our customers.
We Offer :
- Factory Direct Pricing - 45% off MSRP
- FREE Nationwide Shipping
- Delivery within 5-7 business days
- $25 Discount when you email us for a quote
- Thumbs Made in America
Features of our thumbs:
- Sizes 18 - 36" in stock for fast shipping
- Manual and Hydraulic Functions
- Fully retractable
- Quick Release pins
- 7" width for added stability
- Weld on Mounting
MiniExcavatorThumbs.com is the Nations leading online retailer of Compact excavator thumb attachments. We do anything possible to move mountains for our customers. Call or email us anytime to get a quote on your equipment .
This compact crawler excavator is great for ground leveling and backfilling. It offers an offset boom with built in swing that provides awesome visibility but also multi- width excavation and parallel to wall operation. If your looking to add some extra value to your TC29 we suggest you add a fully hydraulic thumb attachment.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
Recommended: Size based on operating weight
We suggest a
24" Basic Hydraulic
24" Fully Hydraulic
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| I. MAX CUTTING HEIGHT |
13.4 ft in |
4070 mm |
| J. MAX LOADING HEIGHT |
9.3 ft in |
2840 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
4.9 ft in |
1500 mm |
| M. MAX DIGGING DEPTH |
9.1 ft in |
2760 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
4.6 ft in |
1400 mm |
| E. GROUND CLEARANCE |
0.89 ft in |
270 mm |
| G. HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| H. TAIL SWING RADIUS |
4.3 ft in |
1300 mm |
| F. TRACK GAUGE |
3.6 ft in |
1100 mm |
| N. SHOE SIZE |
11.8 in |
300 mm |
Specification
| MAKE |
Mitsubishi |
| MODEL |
S 4L |
| NET POWER |
28 hp |
20.9 kw |
| POWER MEASURED @ |
2200 rpm |
| DISPLACEMENT |
91 cu in |
1.5 L |
| NUMBER OF CYLINDERS |
4 |
| OPERATING WEIGHT |
6480 lb |
2939.3 kg |
| FUEL CAPACITY |
13.7 gal |
52 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
22.5 gal |
85 L |
| OPERATING VOLTAGE |
12 V |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
3050 psi |
21029 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
26.2 gal/min |
99 L/min |
| SWING SPEED |
10 rpm |
| SHOE SIZE |
11.8 in |
300 mm |
| GROUND PRESSURE |
3.9 psi |
26.9 kPa |
| MAX TRAVEL SPEED |
2.9 mph |
4.6 km/h |
| DRAWBAR PULL |
6300 lb |
28 kN |
| TRACK GAUGE |
3.6 ft in |
1100 mm |
| REFERENCE BUCKET CAPACITY |
0.09 yd3 |
0.07 m3 |
| MINIMUM BUCKET CAPACITY |
0.05 yd3 |
0.04 m3 |
| MAXIMUM BUCKET CAPACITY |
0.14 yd3 |
0.11 m3 |
| BOOM/STICK OPTION (HEX) 1 |
boom w/ dipperstick 53'' (1350mm) |
| MAX DIGGING DEPTH |
9.1 ft in |
2760 mm |
| MAX CUTTING HEIGHT |
13.4 ft in |
4070 mm |
| MAX LOADING HEIGHT |
9.3 ft in |
2840 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
4.9 ft in |
1500 mm |
| BOOM/STICK OPTION (HEX) 2 |
boom w/ dipperstick 61'' (1550mm) |
| MAX DIGGING DEPTH |
9.7 ft in |
2960 mm |
| MAX CUTTING HEIGHT |
13.7 ft in |
4190 mm |
| MAX LOADING HEIGHT |
9.7 ft in |
2960 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
5.1 ft in |
1550 mm |
| WIDTH TO OUTSIDE OF TRACKS |
4.6 ft in |
1400 mm |
| HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| GROUND CLEARANCE |
0.89 ft in |
270 mm |
| TAIL SWING RADIUS |
4.3 ft in |
1300 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Mini+Excavator&make=Terex&model=TC29&modelid=92651#ixzz3JR1tDrtT
To get the most accurate size for your machine we always suggest you measure the machine. This will only take 5 minutes.
For measuring instructions click this link. Measuring instructions
Our suggested sizes are based off of the Yanmar Vio-55 operating weight of 11576 lbs.
We suggest a :
-30 " Mechanical
-30" Basic Hydraulic
-30" Fully Hydraulic
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
18.2 ft in |
5560 mm |
| C. SHIPPING HEIGHT OF UNIT |
8.6 ft in |
2620 mm |
| I. MAX CUTTING HEIGHT |
21.1 ft in |
6440 mm |
| J. MAX LOADING HEIGHT |
14.4 ft in |
4400 mm |
| K. MAX REACH ALONG GROUND |
20.3 ft in |
6200 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
9.5 ft in |
2900 mm |
| M. MAX DIGGING DEPTH |
13.1 ft in |
3980 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
6.5 ft in |
1990 mm |
| E. GROUND CLEARANCE |
1.2 ft in |
360 mm |
| G. HEIGHT TO TOP OF CAB |
8.6 ft in |
2620 mm |
| H. TAIL SWING RADIUS |
3.3 ft in |
995 mm |
| N. SHOE SIZE |
15.7 in |
400 mm |
Specification
| MAKE |
Yanmar |
| MODEL |
4TNV88-PBV |
| GROSS POWER |
38.7 hp |
28.9 kw |
| POWER MEASURED @ |
2400 rpm |
| OPERATING WEIGHT |
11576 lb |
5250.8 kg |
| FUEL CAPACITY |
16.9 gal |
64 L |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
3553 psi |
24497.1 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
35 gal/min |
132.5 L/min |
| SWING SPEED |
10 rpm |
| SHOE SIZE |
15.7 in |
400 mm |
| GROUND PRESSURE |
4.1 psi |
28.4 kPa |
| MAX TRAVEL SPEED |
2.7 mph |
4.3 km/h |
| BOOM/STICK OPTION (HEX) 1 |
Standard |
| SHIPPING HEIGHT OF UNIT |
8.6 ft in |
2620 mm |
| SHIPPING LENGTH OF UNIT |
18.2 ft in |
5560 mm |
| MAX DIGGING DEPTH |
13.1 ft in |
3980 mm |
| MAX REACH ALONG GROUND |
20.3 ft in |
6200 mm |
| MAX CUTTING HEIGHT |
21.1 ft in |
6440 mm |
| MAX LOADING HEIGHT |
14.4 ft in |
4400 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
9.5 ft in |
2900 mm |
| WIDTH TO OUTSIDE OF TRACKS |
6.5 ft in |
1990 mm |
| HEIGHT TO TOP OF CAB |
8.6 ft in |
2620 mm |
| GROUND CLEARANCE |
1.2 ft in |
360 mm |
| TAIL SWING RADIUS |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Midi+Excavator&make=Yanmar&model=Vio55-5&modelid=105988#ixzz3Ixx2hBdz
One of the nice things about living in a warm climate like Tampa Florida is that the seasonal economic impact experienced in other parts of the country due to weather don't effect us as much. Especially in the construction industry. We get to experience steady year round work that others would kill for. 
