This compact crawler excavator is great for ground leveling and backfilling. It offers an offset boom with built in swing that provides awesome visibility but also multi- width excavation and parallel to wall operation. If your looking to add some extra value to your TC29 we suggest you add a fully hydraulic thumb attachment.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions (diagram attached)
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
Recommended: Size based on operating weight
We suggest a
24" Basic Hydraulic
24" Fully Hydraulic
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| I. MAX CUTTING HEIGHT |
13.4 ft in |
4070 mm |
| J. MAX LOADING HEIGHT |
9.3 ft in |
2840 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
4.9 ft in |
1500 mm |
| M. MAX DIGGING DEPTH |
9.1 ft in |
2760 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
4.6 ft in |
1400 mm |
| E. GROUND CLEARANCE |
0.89 ft in |
270 mm |
| G. HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| H. TAIL SWING RADIUS |
4.3 ft in |
1300 mm |
| F. TRACK GAUGE |
3.6 ft in |
1100 mm |
| N. SHOE SIZE |
11.8 in |
300 mm |
Specification
| MAKE |
Mitsubishi |
| MODEL |
S 4L |
| NET POWER |
28 hp |
20.9 kw |
| POWER MEASURED @ |
2200 rpm |
| DISPLACEMENT |
91 cu in |
1.5 L |
| NUMBER OF CYLINDERS |
4 |
| OPERATING WEIGHT |
6480 lb |
2939.3 kg |
| FUEL CAPACITY |
13.7 gal |
52 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
22.5 gal |
85 L |
| OPERATING VOLTAGE |
12 V |
| HYDRAULIC SYSTEM RELIEF VALVE PRESSURE |
3050 psi |
21029 kPa |
| HYDRAULIC PUMP FLOW CAPACITY |
26.2 gal/min |
99 L/min |
| SWING SPEED |
10 rpm |
| SHOE SIZE |
11.8 in |
300 mm |
| GROUND PRESSURE |
3.9 psi |
26.9 kPa |
| MAX TRAVEL SPEED |
2.9 mph |
4.6 km/h |
| DRAWBAR PULL |
6300 lb |
28 kN |
| TRACK GAUGE |
3.6 ft in |
1100 mm |
| REFERENCE BUCKET CAPACITY |
0.09 yd3 |
0.07 m3 |
| MINIMUM BUCKET CAPACITY |
0.05 yd3 |
0.04 m3 |
| MAXIMUM BUCKET CAPACITY |
0.14 yd3 |
0.11 m3 |
| BOOM/STICK OPTION (HEX) 1 |
boom w/ dipperstick 53'' (1350mm) |
| MAX DIGGING DEPTH |
9.1 ft in |
2760 mm |
| MAX CUTTING HEIGHT |
13.4 ft in |
4070 mm |
| MAX LOADING HEIGHT |
9.3 ft in |
2840 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
4.9 ft in |
1500 mm |
| BOOM/STICK OPTION (HEX) 2 |
boom w/ dipperstick 61'' (1550mm) |
| MAX DIGGING DEPTH |
9.7 ft in |
2960 mm |
| MAX CUTTING HEIGHT |
13.7 ft in |
4190 mm |
| MAX LOADING HEIGHT |
9.7 ft in |
2960 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
5.1 ft in |
1550 mm |
| WIDTH TO OUTSIDE OF TRACKS |
4.6 ft in |
1400 mm |
| HEIGHT TO TOP OF CAB |
8.2 ft in |
2500 mm |
| GROUND CLEARANCE |
0.89 ft in |
270 mm |
| TAIL SWING RADIUS |
4.3 ft in |
1300 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Mini+Excavator&make=Terex&model=TC29&modelid=92651#ixzz3JR1tDrtT
Bobcat has always made a great machine. But if you want to unlock the full potential of the Bobcat 334G you need to add a thumb attachment for extra operating control and ease of use. A thumb could be the difference between a 30min job and an hour long job.
These thumbs are made from the same quality and are the heavy duty alternative to the "kits" you'll find.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Measuring Instructions
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
Recommended: Size based on operating weight of 7568.5 lb
We suggest a
27" Mechanical - $450 FREE Shipping
27" Basic Hydraulic - $635 + FREE Shipping
27" Fully Hydraulic - $685 + FREE Shipping
If you measure your machine and need something larger please email us with the length for a quote.
Selected Dimensions
| A. SHIPPING LENGTH OF UNIT |
16 ft in |
4889 mm |
| C. SHIPPING HEIGHT OF UNIT |
7.7 ft in |
2358 mm |
| I. MAX CUTTING HEIGHT |
15.4 ft in |
4708 mm |
| J. MAX LOADING HEIGHT |
10.7 ft in |
3270 mm |
| K. MAX REACH ALONG GROUND |
17 ft in |
5167 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
8.3 ft in |
2533 mm |
| M. MAX DIGGING DEPTH |
11.2 ft in |
3403 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
5.1 ft in |
1540 mm |
| D. LENGTH OF TRACK ON GROUND |
5.1 ft in |
1562 mm |
| G. HEIGHT TO TOP OF CAB |
7.7 ft in |
2358 mm |
| H. TAIL SWING RADIUS |
4.6 ft in |
1390 mm |
| O. COUNTERWEIGHT CLEARANCE |
1.8 ft in |
551 mm |
| F. TRACK GAUGE |
4 ft in |
1220 mm |
| N. SHOE SIZE |
12.6 in |
320 mm |
Specification
| MAKE |
Kubota |
| MODEL |
V-2203-M-DI-E2B |
| GROSS POWER |
40.1 hp |
29.9 kw |
| POWER MEASURED @ |
2400 rpm |
| DISPLACEMENT |
134.3 cu in |
2.2 L |
| OPERATING WEIGHT |
7568.5 lb |
3433 kg |
| FUEL CAPACITY |
15.3 gal |
57.9 L |
| HYDRAULIC PUMP FLOW CAPACITY |
24 gal/min |
90.9 L/min |
| SWING SPEED |
9.2 rpm |
| SHOE SIZE |
12.6 in |
320 mm |
| GROUND PRESSURE |
4.5 psi |
30.8 kPa |
| MAX TRAVEL SPEED |
3.5 mph |
5.6 km/h |
| TRACK GAUGE |
4 ft in |
1220 mm |
| BOOM/STICK OPTION (HEX) 1 |
Stick 1500mm |
| SHIPPING HEIGHT OF UNIT |
7.7 ft in |
2358 mm |
| SHIPPING LENGTH OF UNIT |
16 ft in |
4889 mm |
| MAX DIGGING DEPTH |
11.2 ft in |
3403 mm |
| MAX REACH ALONG GROUND |
17 ft in |
5167 mm |
| MAX CUTTING HEIGHT |
15.4 ft in |
4708 mm |
| MAX LOADING HEIGHT |
10.7 ft in |
3270 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
8.3 ft in |
2533 mm |
| WIDTH TO OUTSIDE OF TRACKS |
5.1 ft in |
1540 mm |
| HEIGHT TO TOP OF CAB |
7.7 ft in |
2358 mm |
| COUNTERWEIGHT CLEARANCE |
1.8 ft in |
551 mm |
| TAIL SWING RADIUS |
4.6 ft in |
1390 mm |
| LENGTH OF TRACK ON GROUND |
5.1 ft in |
1562 mm |
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=&category=Mini+Excavator&make=Bobcat&model=334&modelid=92961#ixzz3I732zsHd
Recommended Mini Excavator Thumb Attachment sizes for a Komatsu pc35 Operating Weight and Specs
We are always getting requests for quotes on suggested thumb sizes for mini excavators.
In order to get the most accurate size we suggest you measure the machine. This only takes five minutes.
Instructions
1. Place the stick of the machine straight and the bucket angeles to form a 90 degree angle with the stick.
2. Measure from the Stick of the machine to the teeth or edge of the bucket.
This will indicate the proper size thumb for the machine.
Recommended: Size based on operating weight
We suggest a
30" Mechanical Mini Excavator Thumb FREE Shipping
30" Basic Hydraulic Mini Excavator Thumb FREE Shipping
30" Fully Hydraulic Mini Excavator Thumb - FREE Shipping
Selected Dimensions
| K. MAX REACH ALONG GROUND |
17.1 ft in |
5225 mm |
| L. MAX VERTICAL WALL DIGGING DEPTH |
8.9 ft in |
2720 mm |
| M. MAX DIGGING DEPTH |
10.4 ft in |
3170 mm |
| B. WIDTH TO OUTSIDE OF TRACKS |
5.8 ft in |
1740 mm |
| D. LENGTH OF TRACK ON GROUND |
15.9 ft in |
4850 mm |
| E. GROUND CLEARANCE |
6.9 ft in |
2105 mm |
| G. HEIGHT TO TOP OF CAB |
8.3 ft in |
2530 mm |
| H. TAIL SWING RADIUS |
3.1 ft in |
950 mm |
| O. COUNTERWEIGHT CLEARANCE |
15.9 ft in |
4850 mm |
Specification
| MAKE |
Komatsu |
| MODEL |
3D88E-5 |
| GROSS POWER |
29.1 hp |
21.7 kw |
| POWER MEASURED @ |
1.6 rpm |
| DISPLACEMENT |
100 cu in |
1.6 L |
| OPERATING WEIGHT |
8245 lb |
3740 kg |
| FUEL CAPACITY |
11.6 gal |
44 L |
| COOLING SYSTEM FLUID CAPACITY |
0.9 gal |
3.3 L |
| HYDRAUILC SYSTEM FLUID CAPACITY |
8.7 gal |
33 L |
| ENGINE OIL CAPACITY |
2 gal |
7.7 L |
| OPERATING VOLTAGE |
12 V |
| SWING SPEED |
9 rpm |
| NUMBER OF CARRIER ROLLERS PER SIDE |
1 |
| NUMBER OF TRACK ROLLERS PER SIDE |
4 |
| MAX TRAVEL SPEED |
2.9 mph |
4.6 km/h |
| REFERENCE BUCKET CAPACITY |
0.07 yd3 |
0.05 m3 |
| MINIMUM BUCKET CAPACITY |
0.07 yd3 |
0.05 m3 |
| MAXIMUM BUCKET CAPACITY |
0.17 yd3 |
0.13 m3 |
| MAX DIGGING DEPTH |
10.4 ft in |
3170 mm |
| MAX REACH ALONG GROUND |
17.1 ft in |
5225 mm |
| MAX VERTICAL WALL DIGGING DEPTH |
8.9 ft in |
2720 mm |
| WIDTH TO OUTSIDE OF TRACKS |
5.8 ft in |
1740 mm |
| HEIGHT TO TOP OF CAB |
8.3 ft in |
2530 mm |
| GROUND CLEARANCE |
6.9 ft in |
2105 mm |
| COUNTERWEIGHT CLEARANCE |
15.9 ft in |
4850 mm |
| TAIL SWING RADIUS |
3.1 ft in |
950 mm |
| LENGTH OF TRACK ON GROUND |
15.9 ft in |
4850 mm |
This info was provided by:
New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=construction+equipment&category=Mini+Excavator&make=Komatsu&model=PC35MR-2&modelid=92256#ixzz3DfyI8UdJ
